Abstract:In this paper, a board type sodium cooled breed and burn reactor core is further designed and applied to perform minor actinide (MA) transmutation. MA is homogeneously loaded in all the fuel sub-assemblies with a weight fraction of 2.0 wt.%, 4.0 wt.%, 6.0 wt.%, 8.0 wt.%, 10.0 wt.% and 12.0 wt.%, respectively. The transmutation efficiency, transmutation amount, power density distribution, neutron fluence distribution and neutronic safety parameters, such as reactivity, Doppler feedback, void worth and delayed neutron fraction, are compared under different MA weight fraction. Neutronics and depletion calculations are performed based on the self-developed MCNP-ORIGEN coupled code with the ENDF/B-VII data library.In the breed and burn reactor core, a number of breeding sub-assemblies are arranged in the inner core in a board type way (scatter load) to breed, and a number of absorbing sub-assemblies are arranged in the inner side of the outer core to absorb neutrons and reduce power density in this area. All the fuel subassemblies (ignition and breeding sub-assemblies) are shuffled from outside in. The core reached asymptotically steady state after about 22 years, and the average and maximum discharged burn-up were about 17.0% and 35.3%, respectively. The transmutation amount increased linearly with the MA weight fraction, while the transmutation rate parabolically varied with the MA weight fraction. Power density in ignition sub-assembly positions increased with the MA weight fraction, while decreased in breeding sub-assembly positions. Neutron fluence decreased with the increase of MA weight fraction. Generally speaking, the core reactivity and void worth increased with the MA weight fraction, while the Doppler feedback and the effective delayed neutron fraction decreased with the increase of the MA weight fraction. (C) 2015 Elsevier Ltd. All rights reserved.

Preliminary Neutronics Design Analysis on Accelerator Driven Subcritical Reactor for Nuclear Waste Transmutation

A Neutronics Concept Design Of Lead-Bismuth Cooled Accelerator-Driven System For Minor Actinide Transmutation

Preliminary Studies of A New Accelerator-Driven Minor Actinide Burner in Industrial Scale

MA Transmutation Performance Simulation and Accompanied Burning-up Analysis for C-ADS

Preliminary Conceptual Design of Accelerator Driven Sub-critical System

Physical Scheme Study of 10 MW Accelerator Driven Sub-critical Reactor

Neutronics Analysis of Minor Actinides Transmutation in a Fusion-Driven Subcritical System

The influence of source locations of different multi-beam concept on the power density distribution and nuclear waste transmutation performance for ADS–NWT

Enhanced transmutation of minor actinides by incorporation of multi-beam design in Accelerator-Driven subcritical system

Preliminary Study on Transmutation of Plutonium and Minor Actinides in Accelerator Driven System

Study of External Source Effects for Different Multibeam Concept for Accelerator-Driven Subcritical Reactor for Nuclear Waste Transmutation (ADS-NWT)

Study Analysis of Multiplication Factor on ADS Transmutation System

Reactor Core Transient Analysis of an Innovative High-Level Nuclear Waste Transmuter with Metal Fuel

Numerical analysis of two-phase flow and heat transfer of fuel particles and liquid metal for waste transmutation blanket

Transmutation Study of Minor Actinides in Mixed Oxide Fueled Typical Pressurized Water Reactor Assembly

Flexibility of ADS for Minor Actinides Transmutation in Different Two-Stage PWR-ADS Fuel Cycle Scenarios

Minor Actinide Transmutation in a Board Type Sodium Cooled Breed and Burn Reactor Core

Preliminary analyses of neutronics schemes for three kinds waste transmutation blankets of fusion-fission hybrid

Minor Actinides Transmutation in Candidate Accident Tolerant Fuel-Claddings U3Si2-FeCrAl and U3Si2-SiC

Study of Minor Actinides Transmutation in PWR MOX fuel

Discretisation effects in the topological susceptibility in lattice QCD