Abstract:Study: Knowledge gained through the clinical history of total joint replacement materials combined with the current promise of new biomaterials provides improved guidelines for biomaterial selection in total disc arthroplasty. Objectives: The following will detail: 1) current biomaterials technology; 2) how current designs of total disc arthroplasty seek to optimize implant performance through judicious biomaterial selection; and 3) what technical obstacles and clinical concerns remain. Methods: Metals and polymers remain the central material components of state-of-the-art total joint arthroplasties. Polymers provide low friction surfaces for articulating bearings and some degree of shock absorption. Metals provide appropriate material properties such as high strength, ductility, fracture toughness, hardness, corrosion resistance, formability, and biocompatibility necessary for use in load-bearing roles required total disc replacement. There are three principal metal alloys used in orthopaedics and particularly in total joint replacement: 1) titanium based alloys; 2) cobalt based alloys; and 3) stainless steel alloys. Alloy specific differences in strength, ductility, and hardness generally determine which of these three alloys is used for a particular application or implant component. Results: Current designs. Two examples of current lumbar (Charitè and Prodisc) and cervical (Bryan and Prestige) disc replacements are compared. The similarities and differences in the biomaterials used for each demonstrate prevailing consensus and some idea of how to best optimize implant performance through biomaterial selection. Conclusion: The primary factors governing total disc arthroplasty biomaterials are similar to those of all total joint arthroplasties: generation of wear debris is the primary source of implant degradation, and the subsequent tissue reaction to such debris is the primary factor limiting the longevity of joint replacement prostheses. Particulate debris generated by wear, fretting, or fragmentation induces the formation of an inflammatory reaction, which at a certain point promotes a foreign-body granulation tissue response that has the ability to invade the bone-implant interface. This commonly results in progressive, local bone loss that threatens the fixation of both cemented and cementless devices alike. All metal alloy implants corrode in vivo. When severe, the degradative process may reduce structural integrity of the implant, and the release of corrosion products is potentially toxic to the host. The corrosion resistance of implant alloys is primarily due to the formation of passive oxide films to prevent significant electrochemical dissolution from taking place. The result of this knowledge is a consensus of opinion as to which materials are best suited for use in current total disc arthroplasty designs, where most total disc replacement designs incorporate cobalt-chromium-molybdenum alloy endplates articulating internally on a relatively soft polymeric core and externally coated with titanium or titanium alloy for enhanced bone fixation.

Recent Development on Surface Modification of Artificial Disc Material for Wear Resistance

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

The application and research progress of diamond-like carbon films in the field of artificial j oints

Studies on the Biotribological and Biological Behavior of Thermally Oxidized Ti6Al4V for Use in Artificial Cervical Disk

The Biotribological Behaviour of an Artificial Cervical Disc Model with Ball-on-Socket Contact Type under Different Material Configurations

Wear studies on ZrO2-filled PEEK as coating bearing materials for artificial cervical discs of Ti6Al4V

In vitro wear study of PEEK and CFRPEEK against UHMWPE for artificial cervical disc application

The research progress offriction and wear properties of polyetheretherketone and its modified materials for artificial j oints

Study on the Tribological Behaviors of Different PEEK Composite Coatings for Use As Artificial Cervical Disk Materials

Biomaterial optimization in total disc arthroplasty

Surface Modification of Biomedical Ti and Ti Alloys: A Review on Current Advances

Wear Performance of UHMWPE and Reinforced UHMWPE Composites in Arthroplasty Applications: A Review

Superior antiwear biomimetic artificial joint based on high-entropy alloy coating on porous Ti6Al4V

An overview of surface modification, A way toward fabrication of nascent biomedical Ti–6Al–4V alloys

Insight into the wear particles of PEEK and CFRPEEK against UHMWPE for artificial cervical disc application: Morphology and immunoreaction

Simultaneous enhancement of anti-friction and wear resistance performances via porous substrate and FeCoNiTiAl high entropy alloy coating of artificial joint materials

Research Status of Biomedical Titanium Alloy and Its Surface Activation

Could Ti6Al4V be alternative as a bearing surface articulated with polymer in artificial cervical disc

Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications

State of the Art and Prospects on Laser Surface Modifications of Titanium Alloys for the Aerospace Industries

Medical ultra-high molecular weight polyethylene modification and tribological characteristics