Abstract:Ultra-low-wear polyethylene (ULWPE) is a new metallocene catalyzed high density polyethylene (HDPE)material. Previous studies have demonstrated that it has excellent biocompatibility and wear resistance, whereupon indicating great potential in the applications to artificial joints. However, as a newly developed material, its tribological behavior and wear resistance mechanism has not been well understood. In the current study, we experimentally evaluated the tribological behavior of ULWPE, and investigated its high wear resistance mechanism in terms of microstructure, crystallization properties, mechanical, physical, and chemical properties. ULWPE manifested the best tribological performance on pin-on-disc (POD) wear tests compared with the most widely used artificial joints materials, with a wear volume of 0.720 ± 0.032 mm3/million cycles (Mc) and 0.600 ± 0.027 mm3/Mc against cobalt-chromium (CoCr) alloy disc and zirconia toughened alumina (ZTA) ceramic disc, respectively. The results of the wear morphology analysis showed that the surface of ULWPE was the slightest, with no obvious surface damage, debris shedding and wear pits. We reveal that three major factors mainly contributed to its high wear resistance. First, ULWPE demonstrated a high crystallinity and a compact crystalline morphology comprised of long linear molecular chains, which contributed to its good mechanical performance. As confirmed by the mechanical test, ULWPE had a very high density, hardness, and tensile elongation at break. The high hardness and strength laid a solid foundation to a low wear volume, and its high ductility and hardness helped to endure abrasive and adhesive wear, resulting in excellent wear resistance. Second, the results of wettability analysis showed that the contact angle formed on the surface of ULWPE was the lowest and the surface energy was the highest. The hydrophilicity of ULWPE provided good lubrication conditions in body fluid. Third, it also had a lower oxidation index. The high hardness, high strength, high ductility and good wetting of ULWPE materials reduced the damage of the material to adhesion and abrasive wear, resulting in excellent wear resistance.

The research progress offriction and wear properties of polyetheretherketone and its modified materials for artificial j oints

Advances in artificial joint bio-friction and wear simulation assessment technology

Study on the Friction and Wear Properties of PEEK Against Cortical Bone Tissue under Different Lubricating Conditions.

Study on the Tribological Behaviors of Different PEEK Composite Coatings for Use As Artificial Cervical Disk Materials

Influence of Cross-Shear and Contact Pressure on Wear Mechanisms of PEEK and CFR-PEEK in Total Hip Joint Replacements

Biological tribology properties of the modified polyether ether ketone composite materials

Tribological Properties of PEEK and Its Composite Material under Oil Lubrication

Wear studies on ZrO2-filled PEEK as coating bearing materials for artificial cervical discs of Ti6Al4V

Tribological risearch advance of peek and its composites

Fretting Wear Study of PEEK-Based Composites for Bio-implant Application

Study on the Wettability and Tribological Behavior of Different Polymers As Bearing Materials for Cervical Prosthesis

Structural and tribological characteristics of ultra-low-wear polyethylene as artificial joint materials

The application and research progress of diamond-like carbon films in the field of artificial j oints

In vitro wear study of PEEK and CFRPEEK against UHMWPE for artificial cervical disc application

Polyetheretherketone development in bone tissue engineering and orthopedic surgery

Tribological and Antibacterial Properties of Polyetheretherketone Composites with Black Phosphorus Nanosheets

State‐of‐the‐art review on the high‐performance poly (ether ether ketone) composites for mechanical, tribological and bioactive characteristics

Effects of Major Components of Synovial Fluid on the Morphology and Wear Rate of Polyetheretherketone (PEEK) Particles under an Accelerated Wear Process

Recent Development on Surface Modification of Artificial Disc Material for Wear Resistance

Friction and wear mechanism of artificial joint composite material PEEK/ZnO under different decomposition motion modes of knee joint

Insight into the wear particles of PEEK and CFRPEEK against UHMWPE for artificial cervical disc application: Morphology and immunoreaction