Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

In-plane shear properties and damage process of composites based on unit cell analytic model

Progressive failure analysis of 2D woven composites at the meso-micro scale

Micro Failure Analysis of Fiber Metal Laminates

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Development of a new constitutive model considering the shearing effect for anisotropic progressive damage in fiber-reinforced composites

Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Initial Damage Induced by Thermal Residual Stress and Microscopic Failure Analysis of Carbon-Fiber Reinforced Composite under Shear Loading

A new simulation method for characterizing the shear behavior of needled carbon fiber composites

Non-orthogonal FE model with stress smoothing for progressive damage analysis of shear pre-deformed 3D angle-interlock woven composites under compression

High-Fidelity Analyses of Composites at Various Length Scales with Discrete Damage Representations

Experimental and numerical investigation of progressive damage and failure behavior for 2.5D woven alumina fiber/silica matrix composites under a complex in-plane stress state

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

The in situ matrix cracking behavior in cross-ply laminates under out-of-plane shear loading

Analytical modeling of fiber–matrix interface failure in unidirectional laminae subjected to in-plane shear loads

A unified damage model for fibrous composite laminae subject to in-plane stress-state and having multi material-nonlinearity

Development and experimental verification of an advanced 3D elastoplastic progressive damage model for composite materials

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS