Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Effectiveness of ferric-alum water treatment residuals in removing orthophosphate

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Comparison of Phosphorus Removal Processes by Ferrous Salts and Ferric Salts

Effectiveness of a drinking-water treatment sludge in removing different phosphorus species from aqueous solution

Phosphorus Adsorption Characteristics of Alum Sludge: Adsorption Capacity and the Forms of Phosphorus Retained in Alum Sludge

Research on Optimization for Phosphorus Removal with Ferrous Salt Process

Effects of Fe(II)/P Ratio and Ph on Phosphorus Removal by Ferrous Salt and Approach to Mechanisms

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Treatment effect on the adsorption capacity of alumina for removal fluoride

Advanced removal of phosphorus from urban sewage using chemical precipitation by Fe-Al composite coagulants

Tuning adsorption capacity of metal–organic frameworks with Al3+ for phosphorus removal: Kinetics, isotherm and regeneration

A comprehensive investigation to the fate of phosphorus in full-scale wastewater treatment plants using aluminum salts for enhanced phosphorus removal

Enhanced phosphate pollutant removal from liquid via adsorption flotation strategy: Synergic effect of Fe(III)-fulvic acid carrier and CTAB

Effect of phosphate concentration, anions, heavy metals, and organic matter on phosphate adsorption from wastewater using anodized iron oxide nanoflakes

Removal of Phosphorus from Wastewater by Different Morphological Alumina

Validation of Polymer-Based Nano-Iron Oxide in Further Phosphorus Removal from Bioeffluent: Laboratory and Scaledup Study

Insight into effects of organic and inorganic phosphorus speciations on phosphorus removal efficiency in secondary effluent

Primary study of fluoride removal from aqueous solution by activated ferric hydroxide

Speciation analysis and formation mechanism of iron-phosphorus compounds during chemical phosphorus removal process

Preparation and Characterization of Ferric-Impregnated Granular Ceramics (fgcs) for Phosphorus Removal from Aqueous Solution