Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Preparation and Characterization of Ferric-Impregnated Granular Ceramics (fgcs) for Phosphorus Removal from Aqueous Solution

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Preparation and Characterization of Lanthanum(iii) Loaded Granular Ceramic for Phosphorus Adsorption from Aqueous Solution

Studies on fluoride adsorption of iron-impregnated granular ceramics from aqueous solution

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Preparation of Fe(III) Peeling‐Intercalation Ball Clay/Oyster Shell Composites and Phosphorus Removal from Wastewater

Fluoride removal from water by granular ceramic adsorption

Fluoride removal on Fe–Al-impregnated granular ceramic adsorbent from aqueous solution

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Enhanced Adsorption Capacity for Phosphate in Wastewater from Thermally Activated Flue Gas Desulfurization Gypsum

Rapid adsorption of phosphorus at low concentration from water using a novel green organometallic material EGCG-Fe

Performance and adsorption mechanism of a magnetic calcium silicate hydrate composite for phosphate removal and recovery

Unexpected Favorable Role of Ca2+ in Phosphate Removal by Using Nanosized Ferric Oxides Confined in Porous Polystyrene Beads.

Removal of phosphate from aqueous solution by ferrihydrite/bagasse composite prepared through in situ precipitation method

Removal of phosphorus from water bodies using high-performance ceramsite prepared from solid wastes

Batch Studies of Phosphonate and Phosphate Adsorption on Granular Ferric Hydroxide (GFH) with Membrane Concentrate and Its Synthetic Replicas

Adsorption of Phosphorus Based on Hangjin Clay Granular Ceramic from Aqueous Solution and Sewage: Fixed-Bed Column Study

Synthesis of magnesium-modified ceramsite from iron tailings as efficient adsorbent for phosphorus removal

Simultaneous immobilizations of soluble phosphorus and fluorine in phosphogypsum by milling with calcareous and aluminiferous samples: Reaction products and immobilization performances

Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads for phosphate removal from water: Preparation, adsorption behavior and pH stability