Abstract:The surface chemical modification for the vapour grown carbon fibers (VGCF) produced with the catalytic dehydrogenation of hydrocarbon have been performed by concentrate nitric acid (65%similar to 68%) for various times in order to extend the practical application in composite materials. The structure of VGCF has been characterized by XRD technique. The XRD results show that the graphite crystal structures of VGCF are transformed upon modification, and the extent of transformation is a function of modification time. The BET results indicate that through the modification the S-BET of VGCF veries, and as the long modification time of 120 min is used. the SBET of VGCF decreases distinctly. The FTIR analyses illuminate that due to the modification the different functional oxygen-containing groups are grown on these surfaces of VGCF, and the total amount of the oxygen-containing groups increases with the modification time. In addition, the profiles of temperature programmed reduction (TPR) display that more than two kinds of oxygen-containing functional groups exist on the surfaces of VGCF and the total amount of oxygen for these oxygen-containing functional groups obtained is more than 2 mmol center dot g(-1). The inicrocalorimetric measurements of NH3 adsorption indicate that the strength and the amount of the functional groups of surface acids increase with the modification time. The transmission electron microscopy (TEM) shows that during modification no damage is observed on these surfaces of the VGCF. The experiments of absorbed oil value (AOV) exhibite that the AOV decreases sharply whereas the hydrophilicity of VGCF increases. Double fluid method for the measurements of the contact angles shows that after modification the surface energy (SE) of VGCF increases apparently. The FTIR measurements of the modified VGCF treated with the titanate coupling agent indicate that the bonding abilities between modified fibers surface and coupling agent are enhanced.

The Hydrophobisation of Activated Carbon Surfaces by Organic Functional Groups

Chemical Modification of Activated Carbons

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Functionalization of Monolithic MOF Thin Films with Hydrocarbon Chains to Achieve Superhydrophobic Surfaces with Tunable Water Adhesion Strength

Preparation of Hydrophobic Hierarchical Pore Carbon–silica Composite and Its Adsorption Performance Toward Volatile Organic Compounds

Functionalized Activated Carbon for Competing Adsorption of Volatile Organic Compounds and Water

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Surface chemistry and catalytic activity in H2O2 decomposition of pyrolytically fluoralkylated activated carbons

Tuning the Hydrophobicity of ZSM-5 Zeolites by Surface Silanization Using Alkyltrichlorosilane

Surface Functionalization of Single-Walled Carbon Nanotubes Using Photolysis for Enhanced Dispersion in an Organic Solvent

Engineering surface functional groups on mesoporous silica: towards a humidity-resistant hydrophobic adsorbent

Fabrication of hydrophobic regenerated activated carbon with high specific surface area

Development on hydrophobic modification of aluminosilicate and titanosilicate zeolite molecular sieves

Surface Modification And Characterization Of Vapor Grown Carbon Fibers

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Chemical Modification And Adsorption Of The Pure Silica Mesoporous Molecular Sieve Kit-1

Functionalization of silica by in-situ grafting hydrotalcite

Fluorine and Bromine Dual-Doped Nanoporous Carbons: Preparation and Surface Chemistry Studies

Aminated hydrophilic ordered mesoporous carbons

Hydrophobic carbon with hollow and hierarchical porous structures for efficient VOCs removal from complex exhaust gases: Experiments and DFT calculations

Fiber-based photothermal, UV-resistant, and self-cleaning coatings fabricated by silicon grafted copolymers of chitosan derivatives and gallic acid