Abstract:In hydrodynamic lubrication problems, the presence of step structures on the surface can cause discontinuities in the film thickness. This article proposes two models for solving the two-dimensional Reynolds equation with film thickness discontinuity using the finite difference method (FDM). In model I, the film thickness variable is defined at the center of the mesh grids, allowing the Reynolds equation to be reformulated in a weak form that eliminates the singularity of film thickness discontinuity and satisfies the flow continuity condition at the film thickness discontinuity region. By considering the step boundary on the surface as the interface, model II is constructed based on the immersed interface method, turning the hydrodynamic lubrication problem into a classical interface problem. The jump conditions across the interface are derived in accordance with the continuous flow requirement. A phase-field function is adopted to describe the interface on the uniform rectangular mesh grids. Numerical experiments are conducted to assess the accuracy and capabilities of the two proposed models for analyzing a step-dimple-textured sealing. The results demonstrate that both modified FDM models can effectively address the thickness discontinuity issue. Model II achieves second-order accuracy for the pressure distribution when dealing with curved interfaces based on Cartesian grids, whereas model I demonstrates first-order accuracy. Both the proposed models exhibit superior accuracy compared to the traditional second-order central FDM when dealing with curved interfaces. Moreover, the performance of model II is further assessed by simulating lubrication problems with complex groove shapes, and the results indicate its flexibility in addressing thickness discontinuity problems with complex curve interface.

Evaluation on Applicability of Reynolds Equation for Squared Transverse Roughness Compared to Cfd

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Experimental and Numerical Investigation on Gravity-Driven Film Flow over Triangular Corrugations

Numerical simulation of flow and heat transfer in journal bearing lubrication

Discussion on the Reynolds Equation for the Slipper Bearing Modeling in Axial Piston Pumps

Computational Studies On Drag Reduction Effect By Surface Grooves

The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces

A Study Of The Film Formation For A Rough Slider Bearing

Modified Finite Difference Methods for Reynold Equation with Film Thickness Discontinuity

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

Numerical Analysis on the Effect of Transverse Surface Roughness in Non-Newtonian Fluid Lubrication

Effects of surface roughness on the drag coefficient of finite-span cylinders freely rolling on an inclined plane

Calculated Journal Bearing Lubrication of Non-Newtonian Medium with Surface Roughness Effects

Effects of Roughness on Fluid Flow Behavior in Ducts

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

Effect of Micro-Dimples on Hydrodynamic Lubrication of Textured Sinusoidal Roughness Surfaces

CFD analysis of the load capacity and oil feeding characteristics of floating bush bearings with bush rotation being considered

Effect of Surface Texture Distribution Parameters on Hydrodynamic Lubrication and Numerical Optimization

Study on Thin Film Lubrication With Second-Order Fluid

Experimental and numerical investigation on the effect of surface roughness on the drag coefficient of a spherical particle

Numerical Analysis of the Influence of Surface Topography on Head-Disk Lubrication