Abstract:An Fe-based nanocrystalline alloy powder is important for application in microwave absorption, and the particle size has a critical impact on the electromagnetic microwave parameters. Therefore, it is necessary to study further the effects of the particle size on such parameters and improve the microwave absorption performance of Fe-based nanocrystalline powers. In this study, Fe–B–P particles were prepared through a synthetic approach consisting of an aqueous chemical reduction and a ball milling treatment. We investigated the effects of ball milling on the microstructure and electromagnetic properties of Fe–B–P particles. The experimental results indicate that the Fe–B–P particles synthesized through an aqueous chemical reduction are amorphous spheres. Fe–B–P particles with an original particle size of 200–1200 nm can be milled into an irregular shape with the size reduced to < 500 nm after 0.5 h of ball milling, and subsequently, the particles become smaller with increases in the milling time, with traces of Fe2O3 generated on the particle surface. The results of the Mössbauer spectra show that a portion of the small particles demonstrate a superparamagnetic property. The volume proportions of the superparamagnetic component increase from 13.1 to 15.8% as the treatment time increases. We measured the permittivity and permeability spectra of Fe–B–P particles within the frequency range of 2–18 GHz. The reflection loss (RL) is − 10 dB for an absorber thickness of 1.7–5.0 mm. The RL is − 20 dB for an absorber thickness of 1.9–2.7 mm. The microwave absorption properties of samples with the same thickness are improved with an increase in the treatment time and are shifted to a higher frequency, which will broaden the bandwidth of the absorption as well.

Mossbauer Study Of Fe-Base Amorphous Ultrafine Particles Prepared By Chemical-Reduction

Ultrafine Amorphous Fe-Ni-B And Fe-P-B Particles

Mossbauer Investigation Of Fe-Ni Fine Particles

Chemical Preparation and Investigation of Fe-P-B Ultrafine Amorphous Alloy Particles

Investigation of Amorphous Fe82P11B7ultrafine Particles Produced by Chemical Reduction

A study on the preparation and magnetic properties of Fe100−xBx ultrafine amorphous powders

A Magnetic and Moessbauer Spectral Study of Core/Shell Structured Fe/Au Nanoparticles

A study on the reduction behavior of Fe2(MoO4)3 with a combined in-situ temperature-programmed reduction-M?ssbauer spectroscopic technique

Mössbauer spectroscopy studies on the particle size distribution effect of Fe–B–P amorphous alloy on the microwave absorption properties

Mössbauer study of amorphous Fe73.5Cu1Nb3Si13.5B9 alloy

57Fe Mössbauer Spectra Study of Coated Α-Fe2o3 Nanoparticles

Fe-P-B Ultrafine Amorphous Particles Produced by Chemical Reduction

The crystallization process of a−Fe 35 Ni 15 B 26 ultrafine particles produced by reduction with borohydride

Mössbauer Study of Ba2Ti2Fe2As4O

Structure And Magnetic Properties Of Co2.73fe0.27o4 Synthesized By The Heat-Decomposition Method

Hyperfine Magnetic-Field In Mechanically Alloyed Fe-Cu

Mössbauer and Magnetic Studies of Surfactant Mediated Ca-Mg Doped Ferrihydrite Nanoparticles

Nanocrystalline iron-based alloys investigated by Mössbauer spectrometry

A Study of Fe-Ni-B Ultrafine Alloy Particles Produced by Reduction with Borohydride

Mössbauer Studies on High Temperature Solution Grown Pb(Fe 1/2 Nb 1/2 )O 3 Single Crystals

Mössbauer Study of FeNH4(SO4)2·12H2O at Temperatures below 1°K