Abstract:Biomass gasification in a bubbling fluidized bed (BFB) reactor is numerically studied based on a particle-scale computational fluid dynamics-discrete element method (CFD-DEM), with thermochemical and polydispersity effects featuring. After model validation, the particle-scale information (e.g., particle motions, particle mixing, solid dispersion, and heat transfer contribution) are thoroughly explored with the discussion of the effects of several critical operating parameters on particle behaviours. The results show that the middle dense region has the highest biomass pyrolysis reaction rate due to the vigorous particle motion. Sand and biomass particles show synchronous horizontal motions, and the solid vertical dispersion coefficients are much higher than the solid horizontal ones, denoting that the vertically introduced gas flow dominates bed hydrodynamics. A higher operating temperature causes a higher solid dispersion coefficient. Elevating temperature and steam to biomass ratio (S/B) first increases and then decreases the particle mixing index. Convection plays a dominant role during the biomass gasification process, followed by the radiation and heat of reaction. The conduction accounts for the smallest proportion and can be neglected. Increasing operating temperature promotes chemical reactions, biomass temperature, and all heat transfer modes. Increasing S/B promotes biomass motions and gasification reactions, leading to more heat consumed and biomass temperature decrease. Decreasing biomass temperature results in a larger temperature difference between biomass particles and bed material, which enhances the conduction, convection, and radiation.

Analysis of the Fluidization Characteristics of the Sand and Biomass Mixture

Investigation on the Minimum Fluidization Velocity of Mixture Containing Biomass Materials and Sands

Fluidization Behavior of Biomass Particles and Its Improvement in a Cold Visualized Fluidized Bed

Research on Minimum Fluidization Velocity of Mixture of Pelletized Biomass and Sands

Review on Biomass Fluidized Bed Combustion/Gasification Sintering Characteristic and Mechanism

STUDY ON THE FLUIDIZATION OF SAWDUST AND RICE HUSK

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Study on Biomass Circulation and Gasification Performance in a Clapboard-Type Internal Circulating Fluidized Bed Gasifier.

Experimental Study on Rice Husk Combustion in a Circulating Fluidized Bed

Biomass Gasification In Circulating Fluidized Bed

Study of the Bed Agglomeration During the Fluidized Bed Combustion of Rice Straw

Bed Agglomeration and Straw Ash Behavior During Fluidized Bed Combustion of Rice Straw

The Influence of Inert Additives and Recycling Raw Gas on Biomass Gasification in A Fluidized Bed Gasifier

Fluidization and Organic Matter Degradation of Bioparticle

INVESTIGATION OF THE AGGLOMERATION IN THE RICE STRAW FIRED FLUIDIZED BED

The characteristics of fluidization and gasification of biomass in circulating fluidized bed

Experiment research on utilization of particle biomass fuel in sintering process

Fluidization of Sawdust in a Cold Model Circulating Fluidized Bed: Experimental Study

Particle Behaviours of Biomass Gasification in a Bubbling Fluidized Bed

Experimental Investigation On The Influence Of Air Velocity On The Particle Dispersion Behavior Of Rice Husk In A Fuel-Rich/Lean

Experimental Research for Biomass Steam Gasification in a Fluidized Bed