Abstract:The switching probability of magnetic elements for heat assisted recording is investigated. It is found that FePt elements with a diameter of 5 nm and a height of 10nm show, at a field of 0.5 T, thermally written in errors of 12 percent, which is significant too large for bit patterned magnetic recording. Thermally written in errors can be decreased if larger head fields are applied. However, larger fields lead to an increase the fundamental thermal jitter. This leads to a dilemma between thermally written in errors and fundamental thermal jitter. This dilemma can be partly relaxed by increasing the thickness of the FePt film up to 30nm. For realistic head fields, it is found that the fundamental thermal jitter is in the same order of magnitude of the fundamental thermal jitter in conventional recording, which is about 0.5 to 0.8 nm. Composite structures consisting of high Curie top layer and FePt as hard magnetic storage layer can reduce the thermally written in errors to be smaller than 10-4 if the damping constant is increased in the soft layer. Large damping may be realized by doping with rare earth elements. Similar to single FePt grains also in composite structure an increase of switching probability is sacrifices by an increase of thermal jitter. Structures utilizing first order phase transitions breaking the thermal jitter and writeability dilemma are discussed.

FePt-Based Exchange-Coupled Composite Perpendicular Recording Media

Exchange Coupling Assisted FePtC Perpendicular Recording Media

Micromagnetic Studies on Exchange Coupled Composite Recording Media

Structural and Magnetic Properties of $\text{l}1_{\textrm {0}}$ -Fept-based Exchange Coupled Composite Films with FeRu Underlayers

The Structure and Magnetic Properties of Fept Based Perpendicular Exchange Coupled Composite Films

$L1_{0}$ FePt/Fe Exchange Coupled Composite Structure on MgO Substrates

Magnetic Film Thickness Effects on the Recording Performance of Perpendicular Media

Design Consideration and Practical Solution of High-Performance Perpendicular Magnetic Recording Media

Thermal Stability of FePt-Based Exchange Coupled Composite Films

Magnetic Properties of Perpendicular Exchange Coupled Composite with A Synthesis Antiferromagnetic Sandwich Structure

Fundamental limits in heat assisted magnetic recording and methods to overcome it with exchange spring structures

Forc-Study of Magnetization Reversal of L1(0)-Fept Based Exchange Coupled Composite Films

Development of ${\rm L}1_{0}$ FePt:C (001) Thin Films with High Coercivity and Small Grain Size for Ultra-High-Density Magnetic Recording Media

CoPt/Ag(Cu) Nanocomposite Films for Ultra-High Density Perpendicular Magnetic Recording Media

Experimental realization of graded L10-FePt/Fe composite media with perpendicular magnetization

Electrolessly Plated Cobalt Alloy-Films For Perpendicular Magnetic Recording Media

Perpendicular Exchange Coupling in Tbfeco/Fept Bilayer Films

Experimental Realization Of Graded L1(0)-Fept/Fe Composite Media With Perpendicular Magnetization

Fabrication and Magnetic Properties of FePt/Al2O3 Composite Film by Atomic-Layer-deposition

Structural and Magnetic Properties of Perpendicular L10-FePt/[Co/Pt]N Exchange Coupled Composite Films

Nanogranular$L 1_0$fept:C Composite Films for Perpendicular Recording