Abstract:A nanocrystalline layer, which consists of pure β phase with average grain size of about 30nm on Ti–25Nb–3Mo–3Zr–2Sn alloy, was fabricated by surface mechanical attrition treatment (SMAT). The microstructure evolution, phase transitions and thermal stability of the nanocrystalline layer during isochronal annealing at temperatures of 300–600°C were investigated by XRD and TEM. During annealing, the nanocrystalline layer underwent recovery, recrystallization and significant grain growth. Recovery occurs at temperatures from 300 to 400°C resulting in strain relaxation, dislocation annihilation and a very limited growth of β grains dominated by re-ordering of grain boundaries (GBs). α Precipitates start to precipitate along the β GBs at 350°C, which exhibit equiaxed morphology with size less than 10nm. Recrystallization proceeds at a higher temperature up to 450°C leading to a reduction of β grain size. Due to the pinning effect of the α precipitates, β grains sizes can be maintained less than 100nm until the annealing temperature increased to 550°C, e.g., 0.41 Tm (melting temperature in K), above which significant grain growth occurs to overstep nanocystalline scale, and the growth activation energy of β grains is calculated as 40.8kJ/mol. The abnormal low value is caused by the nonequilibrium GBs of β grains in the as-SMATed surface layer, which increase atomic mobility even in the presence of pinning effect of the α precipitates on the β GBs.

Surface Nanocrystallization of Zircaloy-4 by Surface Mechanical Attrition Treatment

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Nanocrystallization of Zirconium Subjected to Surface Mechanical Attrition Treatment

Thermal Stability and Corrosion Resistance of Nanocrystallized Zirconium Formed by Surface Mechanical Attrition Treatment

Surface Nanocrystallization of Mg-3 Wt.% Li-6 Wt.% Al Alloy by Surface Mechanical Attrition Treatment

Thermal Stability of Nanogradient Microstructure Produced by Surface Mechanical Rolling Treatment in Zircaloy-4

Microstructure and Thermal Stability of Bulk Nanocrystalline Alloys Produced by Surface Mechanical Attrition Treatment

Microstructural Characterization of Nanocrystalline Nickel Produced by Surface Mechanical Attrition Treatment

Nanocrystallization and Magnetic Properties of Fe-30 Weight Percent Ni Alloy by Surface Mechanical Attrition Treatment

Nanocrystallization of a Quenched RAFM Steel and Microstructure Evolution During Annealing Heat Treatment

Effect of Surface Mechanical Attrition Treatment on Micro-mechanical Properties of ZrCuAlNi Bulk Metallic Glass

Measurement of Microstructural Parameters of Nanocrystalline Fe–30 Wt.%ni Alloy Produced by Surface Mechanical Attrition Treatment

A Coupled EBSD/TEM Analysis of the Microstructure Evolution of a Gradient Nanostructured Ferritic/Martensitic Steel Subjected to Surface Mechanical Attrition Treatment

Determination of mechanical properties of pure zirconium processed by surface severe plastic deformation through nanoindentation

Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient

Synergetic Strengthening of Grain Refinement and Texture in Gradient Zircaloy-4 by Surface Mechanical Rolling Treatment

EFFECT OF SURFACE NANOCRYSTALLIZATION ONMICROSTRUCTURE AND THERMAL STABILITYOF REDUCED ACTIVATION STEEL

Structure Evolution and Thermal Stability of SMAT-derived Nanograined Layer on Ti–25Nb–3Mo–3Zr–2Sn Alloy at Elevated Temperatures

Microstructure Evolution of Zircaloy-4 During Ne Ion Irradiation and Annealing: an in Situ TEM Investigation

Precipitation Behavior of Bulk Nanocrystalline GW103K Alloy Induced by Surface Mechanical Attrition Treatment

Thermal Stability in Nanocrystalline Fe-30 Wt Pct Ni Alloy Induced by Surface Mechanical Attrition Treatment