Abstract:As the core equipment of pumped storage power station, the reversible Pump-Turbine can switch different working modes frequently during operation. It is prone to have an S-shaped characteristic region, and it will greatly affect the performance of the energy storage unit. Therefore, in order to explore the reasons for the occurrence of the S-shaped characteristic region, this paper takes the model reversible Pump-Turbine as the research object. Firstly, the unit speed-unit flow characteristics are compared with the model test results at different operating conditions. Then, the vortex distribution in the flow channel of the unit is analyzed based on the Omega vortex identification method, and compared with the Q criterion of the second-generation vortex identification method. By analyzing the internal flow characteristics of the S-shaped characteristic region under different guide vane openings, the internal flow law of the S-shaped characteristic region is revealed. It is found that the vortex distribution is less and more uniform under the condition of the turbine, and the distribution of strong and weak vortex is not obvious. Under the runaway condition, there is a pressure mutation zone at the outlet edge of the guide vane and the inlet edge of the runner, and there is a circulation with large radial velocity. The flow direction and size of the water flow change sharply with the rotation of the blade, and it is easy to form a vortex to hinder the flow of the water flow. Under the braking condition, due to the sudden change of radial velocity, there is an unstable vortex between the guide vane cascades, and it is easy to cause serious blockage between the guide vane cascades. The vortex at the leading edge and trailing edge of the blade is relatively large, and it is most obvious in the middle section of the guide vane and the runner blade. Under the condition of reverse pump, the flow velocity in the runner is relatively small, and there is a serious flow separation phenomenon. A large annular flow is formed in the vaneless zone between the guide vane and the runner. Due to the change of pressure, the unstable vortex almost occupies the whole flow channel, and it is easy to cause the pressure fluctuation of the unit and even the damage of the runner. It is necessary to avoid the long-term operation of the reversible Pump-Turbine in this area. The research results can provide a theoretical basis for improving the performance of pumped storage units.

Characteristics Study of Pump-turbine at Reverse Pump Conditions

Analysis of Inter-blade Vortex and Runner Blades Force of Pump Turbine during Load Rejection Period

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Study on cavitating vortex rope characteristics of reversible pump-turbine under part load turbine condition

Numerical prediction on over-all performance of double suction pump reverse running as turbine

Numerical simulation of the pump-turbine s characteristic

Investigate the full characteristic of a centrifugal pump-as-turbine (PAT) in turbine and reverse pump modes

Study of Pump-Turbine＇s Pumping Mode at Different Openings of Guide Vane

Study On Transient Hydrodynamic Performance And Cavitation Characteristic Of High-Speed Mixed-Flow Pump

Numerical Simulation of Flow Characteristics of Pump Turbine with Small Guide Vanes Opening

Analysis of vortex characteristics in the S-shaped region of a reversible Pump-Turbine with different guide vane openings based on Omega vortex identification method

Numerical Simulation and Computational Flow Characterization Analyses of Centrifugal Pump Operating as Turbine

Performance characteristics and internal flow patterns in a reverse-running pump–turbine

Analysis of Flow Characteristics of a Pump Turbine under the Transient Condition of 75% Load Rejection

Numerical Simulation and Performance Experiment on Pump and Pump as Turbine

Hydraulic Characterization of Variable-Speed Pump Turbine under Typical Pumping Modes

Numerical Simulation on Pump Transient Characteristic in a Model Pump Turbine

Study on the Unsteady Flow Characteristics of a Pump Turbine in Pump Mode

Experimental Study of the Pressure Fluctuations in A Pump Turbine at Large Partial Flow Conditions

Numerical simulation of the positive-slope performance curve of a reversible hydro-turbine in pumping mode

Analysis of the Pump-Turbine S Characteristics Using the Detached Eddy Simulation Method