Abstract:The development of efficient sample introduction and pretreatment systems for microfluidic chip-based analytical systems is important for their application to real-life samples. In this work, world-to-chip interfacing was achieved by a novel flow-through sampling reservoir featuring a guided overflow design. The flow-through reservoir was fabricated on a 30 x 60 x 3 mm planar glass chip of crossed-channel design used for capillary electrophoresis separations. The 20-microL sample reservoir was produced from a section of plastic pipet tip and fixed at one end of the sampling channel. Sample change was performed by pumping 80-microL samples sandwiched between air segments at approximately 0.48 mL/min flow rate through the flow-through reservoir, introduced from an access hole on the bottom side of the chip. A filter paper collar wrapped tightly around the reservoir guided the overflowing sample solution into a plastic trough surrounding the reservoir and then to waste. The performance of the system was demonstrated in the separation and determination of FITC-labeled arginine, glycine, phenylalanine, and glutamic acid with LIF detection, by continuously introducing a train of different samples through the system without electrical interruption. Employing a separation channel of 4 cm (2-cm effective separation length) and 1.4-kV separation voltage, maximum throughputs of 80/h were achieved with <4.1% carryover and precisions ranging from 1.5% for arginine to 2.6% RSD (n = 11) for glycine. The sampling system was tested in the continuous monitoring of the derivatizing process of amino acids by FITC over a period of 4 h, involving 166 analytical cycles. An outstanding overall precision of 4.8% RSD (n = 166) was achieved for the fluorescein internal standard.

Application of Microfluidic Chip to Realize Controllable Ph Gradient

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

High-throughput 3D microfluidic chip for generation of concentration gradients and mixture combinations

Integrated Microfluidic Chip System with Gravity Driven Multiphase Laminar Flow Separation and Ion Selective Electrode Detection

Preparation of microfluidic chips by electroplating and used for microdroplet study

Non-swelling hydrogel-based microfluidic chips.

High efficiency hydrodynamic chromatography in micro- and sub-micrometer deep channels using an on-chip pressure-generation unit

Microfluidic chip electrophoresis for biochemical analysis

Polar coordinate active-matrix digital microfluidics for high-resolution concentration gradient generation

Recent progress of microfluidic technology for pharmaceutical analysis

Fabricating Technologies of Nanofluidic Chips and Their Applications

Rapid Generation of Spatially and Temporally Controllable Long-Range Concentration Gradients in A Microfluidic Device

3-Dimensional Centrifugal Microfluidic Platform for the Generation of Discrete Concentration Gradients

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

A Novel Microfluidic Platform with Stable Concentration Gradient for on Chip Cell Culture and Screening Assays

Development Of Integrated Capillary Electrophoresis Chips Technology

Design of a high-throughput integrated microfluidic chip combining micromixing and particle sorting functions

Developments And Applications Of Microfluidic Chip-Based Chromatographic Technique

High-Throughput Continuous-Flow Separation in a Micro Free-Flow Electrophoresis Glass Chip Based on Laser Microfabrication