Abstract:Droplet sorting and enrichment, as a prominent field within microfluidic technology, represent a pivotal stage in the manipulation of droplets and particles. In recent times, droplet sorting methods based on lab-on-disk (LOD) have garnered significant interest among researchers for their inherent merits, including high throughput, ease of operation, seamless device integration, and independence from supplementary driving forces. This study introduces a centrifugal force-driven microfluidic chip comprising spiral microchannels. The chip incorporates microhole arrays along the sidewall of the spiral channels, enabling size-based sorting and enrichment of microdroplets under the influence of multiple forces. Firstly, a comparative analysis was performed to assess the influence of the separation port structure and rotational speed on efficiency, and a mechanical modeling approach was employed to conduct kinetic analyses of droplet behavior during instantaneous separation. Those findings demonstrated a good agreement with the experimental results at ω <100 rpm. Subsequently, sorting experiments on homogeneous droplets indicated that repetitive sorting could increase the recovery ratios, RT(α), of high-concentration droplets (20.7%) from 35.3% to over 80%. We also conducted a sorting experiment on three-component homogeneous-phase emulsions using a serially connected chip array, and the sorting throughput was 0.58 mL/min. As a result, the RT(α) for 60 and 160 μm droplets were 99.4% and 88.9%, respectively. Lastly, we conducted elution experiments and dualsample sorting on a single chip, and the fluorescence results demonstrated that this study provided an efficient and non-cross-contaminating sorting method for non-homogenous phase multi-sample microreactor units.

Design of a high-throughput integrated microfluidic chip combining micromixing and particle sorting functions

Design and Performance of a Microfluidic Particle Sorting Device

A microparticle manipulation method facilitated via microfluidic chip based on swirling flow topology design and its application in sorting

Design and Integration of an All-in-one Biomicrofluidic Chip.

A centrifugal-driven spiral microchannel microfiltration chip for emulsion and deformable particle sorting.

Efficient Microfluidic Particle Separation Using Inertial Pre-Focusing and Pre-Separation Structures Without Sheath Flow

A Novel Integrated Microfluidic Chip for On-Demand Electrostatic Droplet Charging and Sorting

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Designing Microfluidic-Chip Filtration with Multiple Channel Networks for the Highly Efficient Sorting of Cell Particles

Design of a Low-Frequency Dielectrophoresis-Based Arc Microfluidic Chip for Multigroup Cell Sorting

A Facile Strategy to Integrate Robust Porous Aluminum Foil into Microfluidic Chip for Sorting Particles

Automated design of a 3D passive microfluidic particle sorter

High-speed discrimination and sorting of sub-micron particles using a microfluidic device

Sheathless inertial focusing chip combining a spiral channel with periodic expansion structures for efficient and stable particle sorting.

Integrated air stream micromixer for performing bioanalytical assays on a plastic chip.

Design, Fabrication and Detection of an Integration Micorfluidic Chip

A Rigid Microfluidic Chip for High-Throughput Fluorescence-Activated Cell Sorting

High-throughput particle manipulation by hydrodynamic, electrokinetic, and dielectrophoretic effects in an integrated microfluidic chip.

A stepwise multi-stage continuous dielectrophoresis separation microfluidic chip with microfilter structures

A compact and efficient three-dimensional microfluidic mixer

Flow-Field-Assisted Dielectrophoretic Microchips for High-Efficiency Sheathless Particle/Cell Separation with Dual Mode