Abstract:The pilot test of infilling polymer-surfactant-preformed particle gel (PPG) flooding has been successfully implemented after polymer flooding in Ng3 block of Gudao Oilfield in China. However, the production characteristics and displacement mechanisms are still unclear, which restricts its further popularization and application. Aiming at this problem, this paper firstly analyzes the production performance of the pilot test and proposed four response types according to the change of water cut curves, including W-type, U-type, V-type response, and no response. Furthermore, the underlying reasons of these four types are analyzed from the aspects of seepage resistance and sweep efficiency. The overall sweep efficiency of gradual-rising W-type, gradual-decreasing W-type, and early V-type response increases from 0.81 to 0.93, 0.55 to 0.89, and 0.94 to 1, respectively. And the sum of seepage resistance along the connection line between production well and injection well for U-type and delayed V-type response increases from 0.0994 to 0.2425, and 0.0677 to 0.1654, respectively. Then, the remaining oil distribution after polymer flooding is summarized into four types on the basis of production and geological characteristics, namely disconnected remaining oil, streamline unswept remaining oil, rhythm remaining oil, and interlayer-controlled remaining oil. Furthermore, the main displacement mechanisms for each type are clarified based on the dimensionless seepage resistance and water absorption profile. Generally, improving connectivity by well pattern infilling is the most important for producing disconnected remaining oil. The synergistic effect of well pattern infilling and polymer-surfactant-PPG flooding increases the dimensionless seepage resistance of water channeling regions and forces the subsequent injected water to turn to regions with streamline unswept remaining oil. The improvement of the water absorption profile by polymer-surfactant-PPG flooding and separated layer water injection contributes to displacing rhythm remaining oil and interlayer-controlled remaining oil. Finally, the paper analyzes the relationships between the remaining oil distribution after polymer flooding and production characteristics of infilling polymer-surfactant-PPG flooding. The study helps to deepen the understanding of infilling polymer-surfactant-PPG flooding and has reference significance for more commercial implementations in the future.

Combined oil displacement system and field test of rhamnolipid

Combined Oil Displacment System and Field Test of Composite Surfactant

The research and application of compound flooding system in the block L of Huabei oilfield

A Laboratory Experimental Study on Enhancing the Oil Recovery Mechanisms of Polymeric Surfactants

Dewatering of Floated Oily Sludge by Treatment with Rhamnolipid.

Evaluation of oil displacement potential of genetically engineered strain WJPAB fermentation broth

Construction and performance evaluation of novel compound oil displacement system for enhanced oil recovery

Research on Characterization Technology and Field Test of Biological Nano-oil Displacement in Offshore Medium- and Low-Permeability Reservoirs

Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil.

A novel method of bidirectional displacement with artificial nitrogen gas cap and edge water for enhanced oil recovery: Experimental and simulation approaches

Experimental study of nanoparticle and surfactant stabilized emulsion flooding to enhance heavy oil recovery

Study on Microscopic Oil Displacement Mechanism of Alkaline-Surfactant-Polymer Ternary Flooding

A review of surfactants as synergists in the field of enhanced oil recovery

Study on Surfactant–Polymer Flooding after Polymer Flooding in High-Permeability Heterogeneous Offshore Oilfields: A Case Study of Bohai S Oilfield

Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Production characteristics and displacement mechanisms of infilling polymer-surfactant-preformed particle gel flooding in post-polymer flooding reservoirs: A review of practice in Ng3 block of Gudao Oilfield

EOR mechanism of fracture oil displacement agent for ultra-low permeability reservoir

Zwitterionic-nonionic compound surfactant system with low chromatographic separation effect for enhanced oil recovery

Technologies of enhancing oil recovery by chemical flooding in Daqing Oilfield, NE China

Development and Application of Efficient Oil Displacement System for Middle-Low Permeability and High Pour-Point Heavy Oil Reservoirs

Optimized polymer enhanced foam flooding for ordinary heavy oil reservoir after cross-linked polymer flooding