Process parameter measurement of oil-water two-phase flow with V-cone meter and conductivity ring

Tan Chao,Dong Feng,Shi Yanyan

2010-01-01

Abstract:Oil-water two-phase flow is commonly encountered in petroleum industrial processes, and due to its inherent complexity, accurate measurement of the process parameters (flow rate and phase concentration) has been a challenge task to be solved urgently. As a branch of differential pressure (DP) flow meter, V-cone flow meter can measure two-phase flow based on the pressure difference before and after the cone body in conjunction with certain two-phase flow model. The electrical sensitivity based phase concentration measurement method detects the change of electrical property of two-phase mixture and determines the phase concentration. The experiment described in this paper was conducted on a 50 mm inner diameter horizontal pipe, the oil-water two-phase flow was measured using a V-cone meter with 0.65 diameter ratio, the flow rate was determined; and a set of conductivity rings were used to determine the phase concentration. The Chisholm measurement equation is modified according to the oil-water flow features. The average relative errors of water holdup and oil mass fraction measurements are 8.1% and 13.7%, respectively. Using the modified measurement equation, the average relative error of oil-water mass flow rate measurement is 4.4%; the average relative errors of the superficial velocities of oil and water are 3.2% and 4.6%, respectively. This research work lays a foundation for further improving the precision of oil-water two-phase flow measurement.