Abstract:Ni-based single crystal line alloy is constituted with gamma phase and gamma' phase in the form of coherency. Since an indenter for two-phase coherent structure is bigger than the usual nano-scale indenter, the press location of indenter may be unclear in nanoindentation simulation. Both gamma phase and gamma' phase may be pressed initially, and the mechanical properties shown are different because of the initial press locations. The nanoindentation of Ni-based single crystal line alloys is simulated by molecular dynamics method. Two models are used to study about the hardness in [001] crystal orientation, one is the model gamma/gamma' with the initial indentation on gamma phase, and the other is the model gamma'/gamma with the initial indentation on gamma' phase. The influence of misfit dislocation at (001) interface on nanoindentation of the two models is analyzed using a center-symmetry parameter. Results show that the misfit dislocation shape of the two models are different after relaxation. Lomer-Cottrell dislocation occurs on (001) interface in the gamma'/gamma model. Before 0.930 nm press depth is reached, there is little change in the (001) interface misfit dislocation of the two models. Relationship between press load and press depth is similar for the two models, and it is the same in the relationship between hardness and press depth. After press depth reaches 0.930 nm, the misfit dislocation at (001) interface for model gamma'/gamma grows big, which results in a smaller press load and a smaller hardness computation in the model gamma'/gamma than that in model gamma/gamma'. When the press depth reach 2.055 nm, we find only a small amount of dislocations in gamma phase that can go into gamma' phase since the misfit dislocation at (001) interface in model gamma/gamma' hinders the process. However, none of dislocations can go into gamma phase because of the prevention caused by Lomer-Cottrell dislocation at the (001) interface in the model gamma'/gamma. That means the Lomer-Cottrell dislocation reinforces the material obviously. So the press load in model gamma'/gamma grows faster than that in model gamma/gamma'.

Anisotropy in homogeneous dislocation nucleation by nanoindentation of single crystal Cu

Advanced Numerical Characterization of Mono-Crystalline Copper with Defects

Nano-Indentation Experiments on Anisotropy of Single Crystal Cu Oriented by EBSD Technique

Nanoindentation Simulation of Ni-Base Single-Crystal Superalloy with the Consideration of Interface Effect

Crystalline Plasticity On Copper (001), (110), And (111) Surfaces During Nanoindentation

Effects of Crystalline Anisotropy and Indenter Size on Nanoindentation by Multiscale Simulation.

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Micro-mechanism of deformation in homogenous Cu under nanoindentation

Effect of Crystallographic Orientation on Nano-indentation Behavior of Nickel Based Single Crystal Super Alloys

On the crystallographic anisotropy of plastic zone size in single crystalline copper under Berkovich nanoindentation

Anisotropy effects in diamond under nanoindentation

Influence Of Initial Indentation Point On Nanoindentation Of Ni-Based Single Crystal Line Alloys

Influnence of Indenter on the Nanoindentation of Ni Based Single Crystal Alloy

Study of Dislocation Nucleation Mechanism in Nanoindentation Process

Effect of Structural Anisotropy on the Dislocation Nucleation and Evolution in 6H SiC under Nanoindentation

Experimental and numerical investigations of anisotropic plasticity response in polycrystalline copper by nanoindentation

Indentation Creep Surface Morphology of Nickel-Based Single Crystal Superalloys

Coupled Effect of Crystallographic Orientation and Indenter Geometry on Nanoindentation of Single Crystalline Copper

Critical Shear Stress for Onset of Plasticity in a Nanocrystalline Cu Determined by Using Nanoindentation

Indentation-induced plastic behavior of nanotwinned CuNi alloy: an atomic simulation

Two-dimensional Quasicontinuum Analysis of the Strengthening and Weakening Effect of Cu/Ag Interface on Nanoindentation