Abstract:COMSOL Multiphysics software-based three-dimensional finite element analysis is widely used in the performance simulation of thermoelectric devices. In this study, this software is used to simulate the heat transfer processes and power generation performance of micro-thermoelectric generators based on a microporous glass template. The temperature and electrical potential fields are coupled to each other through the thermoelectric effects during the calculations. The power generation performances of micro-thermoelectric generators with different template heights (d) for various temperature differences between their hot and cold ends (∆Th-c) are calculated. For the micro-thermoelectric generator that included four pairs of TE couples, the temperature difference between the two sides of the TE columns (∆TTE) and the open circuit voltage (Uoc) both increased with increasing d, but the growth rate gradually decreased. When d is greater than 0.2 mm, the increment basically becomes negligible. The maximum output power (Pmax) first increases and then decreases with increasing d, reaching a maximum value when d is 0.2 mm. Therefore, we can optimize the size of device according to the simulation results to ensure that the device produces the optimal output performance during the experiments. A model with the same parameters used in the experiment (i.e., d=0.2 mm) was then established and it generated a Uoc of 35.2 mV and a Pmax of 228.8 μW when ∆Th-c was 107.5 K (∆TTE = 97.55 K). The errors between the simulation and the experimental results are small and thus also verify the accuracy of the power generation performance test results.

Research Summarization on Micro Thermoelectric Generator

THE APPLICATION RESEARCH OF HEAT SOURCE AND HEAT SINK IN MICRO (MINI) THERMOELECTRIC DEVICE

Measurement and Analysis for Performance of Micro-thermoelectric Generator

Data Fitting and Analysis of Performance for Micro-thermoelectric Generator

MODELING AND OPTIMAL DESIGN FOR MICRO-THERMOELECTRIC GENERATOR

Development and Optimization of High Power Density Micro-Thermoelectric Generators

Modeling and Simulate Analysis for Micro-Thermoelectric Generator

Accurate Mode and Analysis for Micro-thermoelectric Generate Device

Measurement and analysis for performance of micro-thermoelectric generate device with liquid fuel

Design and Modeling of Vacuum Packaged MEMS Thermoelectric Power Generator Using Heat Dissipation Path

Energy Conversion Using New Thermoelectric Generator

Finite Element Simulation of Micro-Thermoelectric Generators Based on Microporous Glass Template

Micro thermoelectric devices: From principles to innovative applications

Recent Developments of Ther-Moelectric Power Generation

Recent developments of thermoelectric power generation

Recent Development and Application of Thermoelectric Generator and Cooler

The latest research progress in the applications of thermoelectric microdevices

Design, Fabrication, and Characterization of CMOS MEMS-Based Thermoelectric Power Generators

Thermoelectric power generation: from new materials to devices

Parametric Study on Thermoelectric Power Generator and Microturbine Combined Power Generation System

Design and Fabrication of Microarchitected Thermoelectric Generators: Prospects and Challenges