Abstract:The effect of high temperature heat treatment on the tribological behavior of carbon/carbon (C/C) composites has been investigated. C/C composite preforms were made from 1K PAN plain carbon cloth, and densified using rapid directional diffusion (RDD) CVI processes. Four specimens treated at 1800, 1800+2000, 2000, and 2300°C, respectively, were prepared. A ring-on-ring specimen configuration was used to simulate aircraft brakes. The brake initial angular velocity ranged from 1800 to 7500 rpm (6.2–26.0 m s−1 average linear sliding velocity). The specific pressure and moment of inertia were 392–784 kPa and 0.25–0.31 kg m2, respectively (1.9–42.3 MJ m−2 kinetic energy loading per unit friction surface area). The results showed that the stability of the brake moment–time curves increased with increasing heat treatment temperature (HTT) for the four composites, and those treated at 2300°C possessed the lowest initial brake moment peak ratio values (from 1.1 to 1.3). The high degree of graphitization and low shear forces of the matrix carbon resulting from the high HTT could allow friction films to develop and reduce those values under the present brake conditions. The friction coefficients of four RDD CVI C/C composites decreased with an increase in specific pressure. The resulting changes in the friction coefficient of the four composites due to the specific pressure changes have basically nothing to do with the interface temperature under those conditions. According to the practical brake conditions, the friction properties of RDD CVD C/C composites could be improved by regulating the structure of the brake discs, changing the specific pressure exerted on the discs and the heat treatment. The linear wear rates of the four materials increased with increasing HTT. The composites treated at 2000°C had both high enough friction coefficients and the lower linear wear rates. The different heat treatment methods at 2000°C had no obvious effect on the friction and wear properties of RDD CVI C/C composites.

Temperature Simulation of C/C Composites under Wet Brake

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Simulation of the Friction Temperature Field for Disc Brake

Thermomechanical Coupling Simulation and Analysis of Wet Multi-Disc Brakes During Emergency Braking

Simulation-based microstructural analysis of thermal–mechanical fatigue behavior in SiCp/A356 composites for brake disc applications

A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

Effect of heat treatment on the tribological behavior of 2D carbon/carbon composites

Numerical Investigation on Thermo Mechanical Behavior in Wet Multidisc Friction Pairs System

Study on Fast Finite Element Simulation Model of Thermal Analysis of Vehicle Brake

Numerical modeling of heat generation process in a disk brake at three thermal contact conditions over an extended braking distance

The thermo-mechanical coupling method of brake disc based on dynamic convective heat transfer

Coupled thermal-structural analysis of an axle mounted C/C-SiC brake disc for high-speed trains

Numerical Simulation of the Stress, Temperature & Wear Behaviors of the Drum Brake

Simulation of High Temperature Friction Stress Field of Multiphase Composite Coating Based on Crystal Microscopic Finite Element Method

Finite element analysis (FEA) of frictional contact phenomenon on vehicle braking system

Simulation Analysis of the Temperature Field and Stress Field of the Brake Shoe of the Heavy-Load Wagon

Design and Thermomechanical Finite Element Analysis of Frictional Contact Mechanism on Automotive Disc Brake Assembly

Simulation Analysis of Thermal Field in a High Speed Electromagnetic Brake

Numerical simulation on the coupling behavior between thermal load, contact stress and wear in a disc brake

A Study on the Finite Difference Simulation Model for Brake Thermal Analysis