Abstract:As a train gains speed, its kinetic energy and the heat energy produced in its breaking process increase greatly. The huge heat load produced by braking of the brake discs strongly affects the braking efficiency. Weak convective heat transfer on the surfaces of brake discs leads to various thermal cracks and braking failure. Convective heat transfer on the surfaces of brake discs is thus an important process that affects the performance of brake discs. There have been few studies on convective heat transfer on the surface of brake discs, and the models used in the reported investigations do not reasonably match the real working conditions of the brake discs. It is well known that the models determine the fluid flow, and the fluid flow determines the convective heat transfer. It is thus difficult to apply the reported results to the real design of brake discs. Against this background, the main contributions of the present paper are the establishing of a flow model reasonably matches the actual working conditions of brake discs and the measurement of local and average convection heat transfer characteristics. To establish the model, in the experimental process the brake discs were drawn by rolling wheels that rolled on a circular orbit. To obtain the convection heat transfer characteristics, the analogy of the naphthalene sublimation technique of heat/mass transfer is adopted. The local Nusselt number on the surface of a brake disc decreases along the radius because convective heat transfer is mainly enforced by fluid flow induced by the brake disc. Because of the weaker effect of the ground surface, the average Nusselt number for the surface of a break disc is larger than that of a rotating disk in cross flow at the same Reynolds number. The average Nusselt number for the surface of a brake disc is larger than that for a rolling wheel at the same Reynolds number. The correlations of the local and average Nusselt numbers with the Reynolds number are established.

The thermo-mechanical coupling method of brake disc based on dynamic convective heat transfer

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Theoretical Modeling and FEA of Thermo-mechanical Coupling Dynamics of Ventilated Disc Brake

Simulation of the Friction Temperature Field for Disc Brake

Simulation Analysis on the Thermal Distortion and its Influencing Factors of Brake Disc

A Prediction Method for Convective Heat Transfer Coefficients of Brake Discs Based on Small Samples Combined Wind Tunnel Tests and CFD Simulations

The Convective Heat Transfer Characteristics of the Brake Disc Surface of a High-Speed Train

The Convective Heat Transfer Characteristics on Outside Surface of Vehicle Brake Disc

A Finite Element Method of Temperature Field of Airplane Braking Disc

Transient Calculation of Temperature Field and Stress Field for High-Speed Electric Multiple Units Brake Disc

Analysis and Research of Three Dimensional Temperature Field and Thermal Stress Field of High-speed Electric Multiple Units Brake Disc

Transient Temperature Finite Element Model of Airplane Disk Brakes

Impacts of Initial SRO on Thermo-mechanical Coupling Characteristics of Disc Brake

Research on heat dissipation performance of electric vehicle brake disc based on multi-field coupling

Analysis of Cooling Performance of Brake Disc Based on Fluent and Workbench

A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact

Influences of Initial DTV on Thermomechanical Coupling Characteristics of Brake

Modeling and Simulation of Brake Judder Considering the Effects of Thermo-Mechanical Coupling

Experimental Study on the Thermo-Mechanical Coupling Characteristic of Asymmetrical Disc Brake

Design and Thermomechanical Finite Element Analysis of Frictional Contact Mechanism on Automotive Disc Brake Assembly

The Analysis of Ttransient Temperature Field Distribution of Vehicle Ventilated Disc Brake under Emergency Braking Condition