Abstract:This paper presents an improved theoretical damped single-axle vehicle-bridge dynamic interaction model to consider the effect of the contact patch size and motor-induced vehicle excitation. The contact patch issue is critical as it determines the minimum time step for simulation and maximum identifiable frequency, while the inclusion of the motor-induced vehicle excitation benefits the design of autonomous self-driven rather than towed vehicles. Estimations of the contact patch size for both the pneumatic tire and solid wheel scenarios are discussed. The contact patch responses, which degenerate into contact point responses when the contact patch size is assumed to be infinitely small, were derived for the first time both from the vehicle and bridge responses to confirm their equivalence. The minimum time step, which determines maximum identifiable frequency but is arbitrarily chosen in literature, is proposed to be determined by the vehicle speed and contact patch length. The procedures to extract multiple bridge triad information including natural frequencies, mode shapes, and damping ratios from the vehicle responses are also presented. Based on extensive parametric analyses, the sinusoidal vehicle excitation becomes more prominent as its amplitude and/or frequency increase and may overshadow the analysis of bridge frequencies of interest. The vehicle acceleration leads to a more accurate extraction of bridge mode shapes and damping ratios than the vehicle displacement since the displacement is dominated by the fundamental mode of bridge vibration. The damping ratio extraction shows an average error of 0.28% from the instantaneous amplitude of the vehicle acceleration signal.

Semi-analytical solution of vehicle–bridge interaction on transient jump of wheel

Analysis of dynamic load of vehicle bumping at bridge-head using distributed spring-damper element

A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

FEM analysis of vehicle-bridge vibration considering bridge deck's vibration

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Theoretical analysis of low-frequency noise radiated from bridge vibrations

An interactive method for the analysis of the simulation of vehicle–bridge coupling vibration using ANSYS and SIMPACK

A vehicle-bridge interaction model considering contact patch size and vehicle self-generated excitation – A theoretical study

Simulation of train–bridge interaction under wind loads: a rigid-flexible coupling approach

A dynamic analysis scheme for the suspended monorail vehicle–curved bridge coupling system

Random analysis of coupled vehicle–bridge systems with local nonlinearities based on explicit time-domain method

Influence of bridge parameters on monorail vehicle–bridge system— A research with multi-rigid body and multi-flexible body coupling theory and Park method

Development of an analytical model for treating bridge-vehicle interaction

Vibration Analysis of Bridge Subjected to a Moving Elastic Vehicle Ith Flexible Connections

Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model