Abstract:Organic/inorganic support made by poly (styrene-co-acrylic acid) P (S-co-AA) and SiO(2) was prepared for immobilizing (n-BuCp)(2)ZrCl(2)/M-1 hybrid catalyst. P(S-co-AA) was first coated on industrialized M-1 catalyst (SiO(2)/MgCl(2)-TiCl(3)). The hybrid catalyst was achieved after immobilizing (n-BuCp)(2)ZrCl(2) on the P(S-co-AA) layer. The barrier property of P(S-co-AA) layer to cocatalyst MMAO was observed by ethylene polymerization. The appearance of the lag phase in the kinetic curve during the first stage polymerization implied that the exterior catalyst ((n-BuCp)(2)ZrCl(2)) could be activated prior to the interior catalyst (M-1). In addition, the morphology, short chain branch degree, molecular weight, molecular weight distribution and crystalline property of polymers obtained at different polymerization times were investigated by scanning electron microscopy (SEM),Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC), respectively. The results showed that the polymer properties had little variance in the initial polymerization stage. However, two melting peaks gradually generated when the polymerization was conducted for 40 min. Moreover, the molecular weight, molecular weight distribution and short chain branch degree showed obvious changes after 40 min of polymerization time. All of those obvious changes of the polymer properties indicated that M-1 catalyst was gradually activated by MMAO after the polymerization were conducted for 40 min. The activated M-1 catalyst led to a decrease in the molecular weight.

Nanofibers of polyethylene produced by SBA-15 supported zirconium catalyst [N-(3-tert-butylsalicylidene)-4′-allyloxylanilinato]2Zr(IV)Cl2

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

MCM-41 and SBA-15 supported Cp2ZrCl2 catalysts for the preparation of nano-polyethylene fibres via in situ ethylene extrusion polymerization

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

EFFECT OF ORGANIC PART OF ORGANIC/INORGANIC HYBRID SUPPORT IMMOBILIZED HYBRID CATALYST ON ETHYLENE POLYMERIZATION

Immobilizing TiCl3/(n-BuCp)2ZrCl2 catalyst on organic/inorganic support for gas-phase ethylene polymerization

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Silica-Supported Nickel and Zirconium Catalysts for Branched Polyethylene

Immobilization of a Zirconium Complex Bearing Bis(phenoxyketimine) Ligand on MCM-41 for Ethylene Polymerization

Combination of 8‐aminoquinoline Nickel Dichloride and Cp2ZrCl2 Catalysts for Ethylene Polymerization

Preparation of Nano-polyethylene Fibers by SBA-15-supported Half-sandwich Titanium(Ⅳ) Aryloxy Catalyst

Preparation Of Nano-Polyethylene Fibers By Sba-15-Supported Half-Sandwich Titanium(Iv) Aryloxy Catalyst

Mesoporous Zeolite SBA-15 Supported Nickel Diimine Catalysts for Ethylene Polymerization

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Short chain-branched polyethylene produced by [(CH3)2C(η-C5H4)(η-C9H6)]ZrCl2 and [(η-C5H4)(η-C9H6)]ZrCl2 metallocene catalyst

Olefin polymerization behavior of metallocene immobilized inside pore of metal-organic frameworks

Influence of Cocatalyst on High Temperature Polymerization of Propylene Catalyzed by Ziegler-Natta Catalyst

Research in Morphology of Polypropylene Grafting Maleic Anhydride /sio2 Supported Titanium Catalysts and Polyethylene

Preparation of Nano-Polyethylene Fibers and Floccules by Extrusion Polymerization Under Atmospheric Pressure Using the SBA-15-Supported Cp2ZrCl2 Catalytic System

Short Chain-Branched Polyethylene Produced by [(Ch3)(2)c(eta-C5h4)(eta-c9h6)]zrcl2 and [Ch2(ch2)(4)c(eta- C5h4)(Eta-C9h6)]Zrcl2 Metallocene Catalyst