Abstract:Adiabatic fixed-bed reactor has proven commercially successful in large scale production of catalytic dehydration of methanol to dimethyl ether. A one dimensional pseudo-homogeneous model of an industrial reactor of dimethyl ether synthesis has been established. To verify the proposed model, the simulation results have been compared to available data from an industrial reactor. A good agreement has been found between them. The distribution of the catalyst bed temperature and concentration of each component was obtained under conditions of inlet temperature 260?C, reaction pressure 1.2MPa and gaseous hourly space velocity 950.7 h-1. With inlet catalyst bed temperature 240-280?C, operating pressure 0.6-1.8MPa and gaseous hourly space velocity 831.8-1069.5 h-1, the influence of these reaction conditions on temperature distribution of the reactor catalytic bed, outlet methanol conversion and the dimethyl ether yield were calculated. The results show that, with the rise of inlet temperature (240-280?C) and operating pressure (0.6-1.8MPa), the outlet conversion of methanol, the hot spot temperature and the DME yield increased. The increase of gaseous hourly space velocity (831.8-1069.5 h-1) leads to a decrease in the hot spot temperature of catalytic bed and the outlet conversion of methanol. But the DME yield rise initially and then descend.

Study on the global kinetics of methanol dehydration to dimethyl ether

Study on the kinetics of methanol dehydration to dimethyl ether under high pressure

Dehydration of Methanol to Dimethyl Ether over Γ‐al2o3 Catalyst: Intrinsic Kinetics and Effectiveness Factor

Global Kinetics of Direct Synthesis of Dimethyl Ether from Syngas in Slurry Reactor over Cu-Zn-Al-Zr Catalyst

Simulation of the internal cooling tubular reactor for Methanol dehydration to dimethyl ether

Reaction Kinetic Study on Ethanol Dehydration

Kinetics study of one-step synthesis of DME from syngas

Intrinsic Kinetics of One-Step Dimethyl Ether Synthesis from Hydrogen-Rich Synthesis Gas over Bi-Functional Catalyst

The Simulation of an Industrial Fixed Bed Reactor for Methanol Dehydration to Dimethyl Ether

Study on the Methanol Dehydration in Slurry Reactor

Intrinsic Kinetics of Dimethyl Ether Synthesis from Syngas

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis

Dimethyl ether synthesis from syngas over bifunctional hybrid catalyst and the intrinsic kinetics

Experimental study of improved two step synthesis for DME production

Process Simulation of Dimethyl Ether Synthesis Via Methanol Vapor Phase Dehydration

Study on Vapor-Liquid Equilibrium for Dimethyl Ether/Methanol Binary System

Study on Synergy Effect in Dimethyl Ether Synthesis from Syngas

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

INTRINSIC KINETICS OF DIMETHYL ETHER SYNTHESIS FROM BIOMASS-SYNGAS IN A FIXED BED REACTOR

Characteristics of the Synthesis of Methanol Using Biomass-Derived Syngas

Intrinsic kinetics of methanol synthesis over catalyst SC309