Abstract:In this work, we performed density functional theory (DFT)-based microkinetic simulations to elucidate the reaction mechanism of methanol synthesis on two of the most stable facets of the cubic In2O3 (c-In2O3) catalyst, namely the (111) and (110) surfaces. Our DFT calculations show that for both surfaces, it is difficult for the H atom adsorbed at the remaining surface O atom around the O vacancy (Ov) active site to migrate to an O adsorbed at the Ov due to the very high energy barrier involved. In addition, we also find that the C-O bond in the bt-CO2* chemisorption structure can directly break to form CO with a lower energy barrier than that in its hydrogenation to the COOH* intermediate in the COOH route. However, our microkinetic simulations suggest that for both surfaces, CO2 deoxygenation to form CO in both pathways, namely the COOH and CO-O routes, are kinetically slower than methanol formation under typical steady state conditions assuming a CO2 conversion of 10% and a CO selectivity of 1%. Although these results agree with previous experimental observations at relatively low reaction temperature, where methanol formation dominates, they cannot explain the predominant formation of CO at relatively high reaction temperature. We tentatively attribute this to the simplicity of our microkinetic model as well as possible structural changes of the catalyst at relatively high reaction temperature. Furthermore, although the rate-determining step (RDS) from the degree of rate control (DRC) analysis is usually consistent with that judged from the DFT calculated energy barriers, for CO2 hydrogenation to methanol over the (111) surface, our DRC analysis suggests homolytic H2 dissociation to be the rate-controlling step, which is not apparent from the DFT-calculated energy barriers. This indicates that CO2 conversion and methanol selectivity over the (111) surface can be further enhanced if homolytic H2 dissociation can be accelerated for instance by introducing transition metal dopants as already shown by some experimental observations.

Intrinsic kinetics of methanol synthesis over catalyst SC309

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Development of an Improved Kinetic Model for CO2 Hydrogenation to Methanol

The Intrinsic Kinetics of Ethyl Acetate Hydrogenation to Ethanol

Kinetic Model for High-Pressure Methanol Oxidation in Gas Phase and Supercritical Water

Experimental and kinetic modelling studies for the design of fixed bed methanol reactor over CuZA catalyst

A DFT-based microkinetic study on methanol synthesis from CO2 hydrogenation over the In2O3 catalyst

Kinetics of Methanol Synthesis from Carbon Dioxide Hydrogenation over Copper–Zinc Oxide Catalysts

KINETICS STUDY OF METHANOL STEAM REFORMING HYDROGEN PRODUCTION IN A MICROREACTOR

Kinetic Study of Complete Liquid-Phase Catalyst for Dimethyl Ether Synthesis

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Kinetic study of carbon monoxide methanation over mesoporous Ni-Mo catalyst prepared by a hydrothermal method

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

CO2 Hydrogenation to Methanol Over Cu/ZnO/Al2O3 Catalyst: Kinetic Modeling Based on Either Single- or Dual-Active Site Mechanism

First-principles-based Microkinetic Modeling of Methanol Steam Reforming over Cu(111) and Cu(211): Structure Sensitive Activity and Selectivity

Experimental and kinetic modeling of CO2 hydrogenation to methanol over Cu/ZnO/ZrO2 catalysts

Experimental work and kinetic modelling of CO2 hydrogenation to methanol on CeO2 supported In2O3 catalyst