Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Clock-disabling Scheme to Reduce Test Power

A Clock Isolation Technique for Low Power SoC Design

A low power architecture based on unidirectional cut

Noise-aware DVFS Transition Sequence Optimization for Battery-Powered IoT Devices.

Clock Low Power Consumption Technique in SoC Design

Low Power Gated Clock Tree Driven Placement

Clock Strategy and Its Enhancement for Reducing Baseband Chip＇s Power Dissipation

Improve Clock Gating Through Power-Optimal Enable Function Selection.

Localizing Test Power Consumption for Scan Testing

Pattern-directed Circuit Virtual Partitioning for Test Power Reduction

Low-Power Scan Testing for Test Data Compression Using a Routing-Driven Scan Architecture

Fast synthesis of low power clock trees based on register clustering

Low-power level converting flip-flop with a conditional clock technique in dual supply systems.

A Power-Effective Scan Architecture Using Scan Flip-Flops Clustering And Post-Generation Filling

Constraining Transition Propagation for Low-Power Scan Testing Using a Two-Stage Scan Architecture.

An Novel Solution for Testing Power and Testing Time

A Novel Low-Power and High-Speed Dual-Modulus Prescaler Based on Extended True Single-Phase Clock Logic.

A Register Clustering Algorithm for Low Power Clock Tree Synthesis

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Power Management during Scan Based Sequential Circuit Testing

A Power Efficient BIST TPG Method on Don't Care Bit Based 2-D Adjusting and Hamming Distance Based 2-D Reordering