Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Clock Low Power Consumption Technique in SoC Design

A Clock Isolation Technique for Low Power SoC Design

Research on low power technology based on Multi Bit Flip Flop

Fast synthesis of low power clock trees based on register clustering

Noise-aware DVFS Transition Sequence Optimization for Battery-Powered IoT Devices.

A Register Clustering Algorithm for Low Power Clock Tree Synthesis

Low Power Gated Clock Tree Driven Placement

Low Power-Consumption IP Core Design on for Universal Video Output Controller

Register Clustering Methodology for Low Power Clock Tree Synthesis.

Clock Strategy and Its Enhancement for Reducing Baseband Chip＇s Power Dissipation

A 0.7-V Clock-gating Cell with Power Gating Technology and 1.56-pA Sleep Power

An Efficient Clock Tree Synthesis Method in Physical Design

Source of IC power consumption and low power design

The Application of Automatic Gating Clock in SoC Clock Network

Study on the Low Power Cache Design Technique

Design Methodology Of Cmos Low Power

Timing-aware Clock Gating of Pulsed-Latch Circuits for Low Power Design.

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Low-power level converting flip-flop with a conditional clock technique in dual supply systems.

Modeling and Optimization of Low Power Resonant Clock Mesh.

Design of A Low-Power Pulse-Triggered Flip-Flop with Conditional Clock Technique