Abstract:In order to optimize and control the reactor operation in the propylene process,it is important and necessary to propose the kinetic parameters and their distributing characteristic model.According to the model,the kinetic profiles (such as the solid content,the monomer concentration,the catalyst concentration,the hydrogen concentration,the temperature in the loop reactor,the cooling water temperature,etc.) and the loop reactor length can obtained,which provides the theoretical basis for optimizing and controlling operation of propylene loop reactor,also for judging if the increasing output of polypropylene is feasible. Based on the above aims and model, this paper analyzed and solved the differential equations,which are put forward and developed in the above paper~([9]).At first,the four orders Runge-Kutta arithmetic on the basis of many literatures and the reactor data in a 70 kt/a polypropylene plant of Fujian petrochemical complex were introduced briefly.Moreover,the input parameters were given in detail on the basis of many literatures and the model results were obtained and analyzed.Based on the simulation results,the model developed can be used to describe the kinetic profiles of the loop reactor in a 70 kt/a polypropylene plant of Fujian petrochemical complex.The kinetic parameters distributing following along the loop reactor length is symmetrical and it is feasible to increase the output of polypropylene by increasing the monomer mass flux from the theory.In short,the model and its application in propylene factory of Fujian petrochemical co., ltd.are satisfactory.

DEVELOPMENT OF A NEW GRADE POLYPROPYLENE PRODUCT IN A LOOP REACTOR BASED ON THE STEADY-STATE MODEL

The Capacity Expansion of Hypol Polypropylene Plant by Process Reconstruction

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Study on Optimal Strategy of Grade Transition in Industrial Fluidized Bed Gas-Phase Polyethylene Production Process

Optimization of grade transition for high-density polyethylene continuous slurry process

Modeling of Coesterification Process for Biodegradable Poly(Butylene Succinate-co-Butylene Terephthalate) Copolyesters

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

Optimal Grade Transition of Polymerization Process with Path Constraints

Optimization of Grade Transition for Continuous Propylene Polymerization Process Using Continuous Stir Reactor in Series Technology

A Heuristic Approach to Grade Transition Strategy of the HDPE Slurry Process in Different Operation Modes

Review of Grade Transition in Continuous Polyolefin Production Process

SIMULATION FOR LIQUID PHASE BULK PROPYLENE POLYMERIZATION IN LOOP REACTOR AT STEADY OPERATION CONDITIONS

MODELING OF LOOP REACTOR FOR POLYPROPYLENE SPHERIPOL TECHNOLOGY

An Analysis on Model of a Loop Reactor for Polypropylene Under a Steady Operating Condition

STEADY-STATE MODELING OF COMMERCIAL LIQUID PHASE BULK PROPYLENE POLYMERIZATION

Steady-state Particle Size Distribution Modeling of Polypropylene Produced in Tubular Loop Reactors

Simulation in a Loop Reactor for Polypropylene under a Steady Operating Condition

Study Advances on Modeling for Industrial Propylene Polymerization

SIMULATION FOR BULK PROPYLENE POLYMERIZATION IN LOOP REACTOR WITH THE STEP CHANGE IN FEED FLOW RATE OF MATERIAL

Steady-state and Dynamic Modeling of Commercial Bulk Polypropylene Process of Hypol Technology