Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Poly(etherimide)/montmorillonite nanocomposites prepared by melt intercalation: morphology, solvent resistance properties and thermal properties

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Study on thermal stability of PP/MMT nanocomposites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and Thermal Characteristics of Silane-Grafted Polyethylene/montmorillonite Nanocomposites

Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers

Unique and redundant functions of SR proteins, a conserved family of splicing factors, in Caenorhabditis elegans development

Solvent Resistant Self-Crosslinked Poly(ether Imide)

Preparation and Properties of Polyethylene/Montmorillonite Composites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Synthesis and Characterization of Thermoplastic Polyurethane/montmorillonite Nanocomposites Produced by Reactive Extrusion

Polypropylene/Montmorillonite Nanocomposites And Intumescent, Flame-Retardant Montmorillonite Synergism In Polypropylene Nanocomposites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites