Abstract:The series resonance type fault current limiter has the advantages of simple operating principle and topological structure,etc. The primary parameter of series resonance type fault current limiter for high-voltage system is reasonable.However,in the process of restraining fault current after a fault occurrence in electrical network,the capacitor and parallel inverter switch will confront poor working condition.This paper studies the above condition by simulation using the software Matlab.Proceeding from the study,we arrive at the conclusions:1)in the process of closing the inverter switch short circuit capacitor to make the current limiter work in short circuit current limiting mode switching from normal operation mode,there is higher-order of voltage(current)oscillation between capacitor and parallel inverter switch,and the peak value of voltage(current)increases and oscillates with the growing of the speed for closing the inverter switch; 2)when the inverter switch is composed of semiconductor device,control system must respond to short circuit and close the inverter switch quickly,otherwise,the semiconductor device may be damaged by over current(voltage);3)during fault current limiter working in current limiting mode to short circuit loop being shut off by relay protection device,the inverter switch will bear the full fault current and oscillation current.If using semiconductor device as inverter switch,the capacity of semiconductor device must be chosen according to the working condition.

Transient Analysis of Liquid Metal Current Limiter Based on PSCAD/EMTDC

Study on Mathematic Model and Model Simulation of the Three Phase Solid State Fault Current Limiter

Electromagnetic–Thermo–Mechanical Coupling Behavior of Cu/Si Layered Thin Plate under Pulsed Magnetic Field

Transient analysis of external field coupling to a cabin with thin-slots and transmission lines loaded by arbitrary nonlinear devices

A Novel Liquid Metal Fault Current Limiter Based on Active Trigger Method

Hybrid Multifunctional Saturated-core Fault Current Limiter

Simulation Study of New Solid-State Fault Current Limiter

Simulation Method for Current-Limiting Effect of Saturated-Core Superconducting Fault Current Limiter

Development of a Hybrid Fault Current Limiter Using Liquid Metal for Large Capacity MVdc Power Systems

Short Circuit Current Limiter in As Network

Investigation of a Double Current-transferring Type Short Circuit Current Limiter

Simulation Study of Series Resonance Type Fault Current Limiter

A Novel Six-Leg Three-Phase Fault Current Limiter

Numerical Simulation and Analysis of A Saturated-Core-Type Superconducting Fault Current Limiter

A Dual-Stage Solid-State Fault-Current Limiter for Flexible DC Distribution Networks

A Novel Integrated Approach for Simulation of Electromagnetic Susceptibility Problem

Experimental Study on the Solid-state Fault Current Limiter with Bypass Inductance

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

Simulation Research on the Effect of the Paralleled Compensating Capacitor on the Solid State Fault Current Limiter Operation

Impact on Transient State Stability of Power System by Solid State Current Limiter

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter