Abstract:Abstract The short-circuit levels have increased considerably in transmission and distribution systems in the last years. Fault current limiter (FCL) devices are a potential solution to this problem. Among several FCL topologies, this group has good experience in the use of superconducting fault current limiters (SFCL) to reduce the electrical current during short-circuits. The literature also presents studies of the saturated iron core superconducting fault current limiter (SIC-SFCL) topology employing mathematical modeling and prototypes design. Some of them have shown promising results, including the construction of pilot prototypes in medium and high voltage substations. The SIC-SFCL simulation studies presented optimal topologies that reduce the amount of ferromagnetic material used in the core and represent well the behavior of this limiter. The finite element method and the finite element analysis are suitable to model the SIC-SFCL. However, a more detailed study focusing on the optimization of the DC bias superconducting coil of the SIC-SFCL has not been presented in the literature yet. In this context, this work proposes a multi-objective optimization method using the Nelder–Mead algorithm to find an optimal geometry for the superconducting coil. In this optimization, the objectives functions are: to maximize the critical current density in the high-temperature superconductor (HTS), minimize the voltage drop in the copper winding, minimize the current through the DC biased superconducting winding, and minimize the price of the HTS superconducting winding. Before implementing the multi-objective optimization algorithm, we have tested a non-superconducting saturated iron core prototype and used the results to validate the simulation models. After that, we have replaced the DC copper winding with an HTS coil in the simulations and initiate the optimization process. Results show that constructing the DC bias superconducting coil using the minimum possible fill factor might not be the best choice.

Numerical Simulation and Analysis of A Saturated-Core-Type Superconducting Fault Current Limiter

Simulation Method for Current-Limiting Effect of Saturated-Core Superconducting Fault Current Limiter

Combining finite element and reinforcement learning methods to design superconducting coils of saturated iron-core superconducting fault current limiter in the DC power system

Performance Analysis on a Flux Coupling Superconducting Fault Current Limiter (SFCL) Considering the Power Grid Integration Based on MATLAB/SIMULINK

Analysis of Key Factors Affecting the Non-Limiting State Reactance of Superconducting Fault Current Limiter

A Novel Six-Leg Three-Phase Fault Current Limiter

Hybrid Multifunctional Saturated-core Fault Current Limiter

Multi-objective optimization for the superconducting bias coil of a saturated iron core fault current limiter using the T-A formulation

Cognition on the Current-Limiting Effect of Saturated-Core Superconducting Fault Current Limiter

Study on Mathematic Model and Model Simulation of the Three Phase Solid State Fault Current Limiter

Study Of The Three-Phase Saturated Transformer Coupling New Bridge-Type Ssfcl

A Compact Saturated Core Fault Current Limiter Magnetically Integrated with Decoupling Windings

A Novel Modularization Design Method of PM Biased SCFCL Considering Leakage Flux Effect and Permeance Matrix Modeling

Conceptual design and simulation of a thermal matrix-type SFCL

Optimized design and electromagnetic analysis of a hybrid type DC SFCL in MMC system

Saturated-core fault current limiters for AC power systems: Towards reliable, economical and better performance application

Implementation of Resistive Type Superconducting Fault Current Limiters in Electrical Grids: Performance Analysis and Measuring of Optimal Locations

Topology Modeling and Design of a Novel Magnetic Coupling Fault Current Limiter for VSC DC Grids

Study on Magnetic-Shield-type Air-Core Transformer Coupling SSFCL

A Novel Multi-Function Saturated-Core Fault Current Limiter

An Economical Three-Phase Fault Current Limiter Considering Different Types of Fault