Abstract:This study focuses on the corrosion inhibition of N80 steel by 8-hydroxyquinoline derivatives in 1 M hydrochloric acid medium. Firstly, three corrosion inhibitors containing different heteroatoms, namely N-dodecyl-5-amino-methyl-8-hydroxyquinoline (12N-HQ), 5-dodecyloxy-methyl-8-hydroxyquinoline (12O-HQ), and 5-dodecylthio-methyl-8-hydroxyquinoline (12S-HQ) were synthesized from 1-dodecylamine, 1-dodecanol, 1-dodecanethiol, and 8-hydroxyquinoline. The structures of the synthesized products were characterized by infrared spectroscopy and nuclear magnetic resonance hydrogen spectrometry. The effects of 12N-HQ, 12O-HQ, and 12S-HQ on the corrosion of N80 steel in hydrochloric acid solution were studied by electrochemical measurements: electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP). The surface analysis of N80 steel was carried out using infrared spectroscopy (FT-IR), scanning electron microscopy (FE-SEM), and X-ray diffractometer (XRD). The IR and 1HNMR spectra results confirmed the generation of characteristic peaks of C-N-C, C-O-C, and C-S-C, indicating that the products were 12N-HQ, 12O-HQ, and 12S-HQ. The PDP results demonstrated that the 12N-HQ, 12O-HQ, and 12S-HQ corrosion inhibitors were all mixed corrosion inhibitors. The EIS results were 93.60%, 93.37%, and 95.31% corrosion inhibition efficiency for the three inhibitors at a concentration of 1 mM, respectively. The FT-IR, FE-SEM, and XRD studies showed that 12N-HQ, 12O-HQ, and 12S-HQ molecules adhered and constructed a surface protective layer on the surface of N80 steel. Density flooding theory (DFT) calculations and molecular dynamics simulations (MD) better explain the influence of 12N-HQ, 12O-HQ, and 12S-HQ molecular structures and electrons on corrosion resistance, in addition to the results obtained by DFT and the simulation of MD agree with the experimental results.

High Efficiency Corrosion Inhibitor 8-Hydroxyquinoline and Its Synergistic Effect with Sodium Dodecylbenzenesulphonate on Az91d Magnesium Alloy

Insight into Anti-Corrosion Behavior and Mechanism of 8-Hydroxyquinoline Inhibitor on AZ91D Alloy in Different Concentrations of Sodium Chloride Solution

Synergistic corrosion inhibition of sodium phosphate and sodium dodecyl sulphate on magnesium alloy AZ91 in 3.5 wt% NaCl solution

Corrosion Inhibition Study of Mg-Nd-Y High Strength Magnesium Alloy Using Organic Inhibitor

Combining the 8-hydroxyquinoline intercalated layered double hydroxide film and sol—gel coating for active corrosion protection of the magnesium alloy

Sodium dodecylbenzene sulfonate film absorbed on magnesium alloy surface: An electrochemical, SKPFM, and molecular dynamics study

Superior tribological and anti-corrosion performance of corrosion inhibitors intercalated LDH-MAO coating on AZ31 Mg alloys

Insight into synergistic corrosion inhibition of sodium benzoate and sodium silicate on LZ91 magnesium alloy: Experimental and theoretical calculations

A Combined Inhibiting Effect of Sodium Alginate and Sodium Phosphate on the Corrosion of Magnesium Alloy Az31 in Nacl Solution

Design, characteristics, and theoretical analyses of 8-hydroxyquinoline derivatives with different heteroatoms as effective corrosion inhibitors

Efficient and long-lasting corrosion inhibition mechanism of an anionic surfactant on AZ91D Mg alloy in oxalic acid solution

Corrosion inhibition of 8-HQ for AA5052 in 3 wt% NaCl solution in presence of trace Cu2+ ions: Electrochemical/surface studies, DFT/MD modeling

Enhanced corrosion protection for MAO coating on magnesium alloy by the synergism of LDH doping with deposition of 8HQ inhibitor film

Sodium dodecyl sulfate (SDS) as an effective corrosion inhibitor for Mg-8Li-3Al alloy in aqueous NaCl: A combined experimental and theoretical investigation

Acid corrosion inhibition of mild steel by 8-hydroxyquinoline derivatives: organic synthesis, characterization, chemical, electrochemical investigation and theoretical calculations

Corrosion Inhibition of AZ31-xLi (x = 4, 8, 12) Magnesium Alloys in Sodium Chloride Solutions by Aqueous Molybdate

The Corrosion Behavior of AZ91D Magnesium Alloy in Simulated Haze Aqueous Solution

Insight at the atomic scale of corrosion inhibition: DFT study of 8-hydroxyquinoline on oxidized aluminum surfaces

Synergistic effect of 8-aminoquinoline and ZnO as hybrid additives in alkaline electrolyte for Al-air battery

Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution

Molecular Dynamic Simulation on the Synergistic Corrosion Inhibition Effect and Mechanism of Quinoline Quaternary Ammonium Salt and L-Methionine