Abstract:Nb3Sn superconducting joints were developed, and the joint characteristics were investigated. The joints were prepared by powder metallurgy to sinter the precursor powders that were mechanically alloyed. The optimized parameters were confirmed through x-ray diffraction studies to confirm the stoichiometry of Nb, Sn, and Cu. First, the precursor powders after mechanical alloying were heat treated without the Nb3Sn wires. Electron backscatter diffraction was used to quantify the crystal morphology, phase distribution, grain boundaries, physical grain orientation, and so on. Small equiaxed Nb3Sn grains were formed after heat treatment. The high-angle grain boundaries in Nb3Sn indicated the complete solid-state diffusion reaction. After the Nb3Sn was successfully prepared, and the superconducting characteristics were measured, we introduce the Nb3Sn wires to prepare Nb3Sn joints and measure their electrical properties. To use the space as economically as possible, the joint was tested under different background fields to estimate the joint resistance under various locations in the magnet. The experimental method and the test results are reported in this work. The joint resistance was tested by using the current decay measure method. The electrical resistance of the Nb3Sn-Nb3Sn joints was on the 10(-13) & omega; level under the 5.5 T magnetic field.

In-Situ Neutron Diffraction Study of A Heating Treatment for Nb3sn Iter Superconducting Wires

An Investigation Into The Heat Treatment Tolerance Of Wst Nb3sn Strands Produced For Massive Fusion Coils

Phase formation investigation of internal-Sn Nb3Sn by in-situ neutron diffraction

A15 PHASE GROWTH KINETICS OF INTERNAL-Sn Nb3 Sn SUPERCONDUCTING WIRES

A15 Phase Formation Kinetics Study of Mono-Element Internal-Sn Nb3sn Superconducting Wires

Flux Pinning Effect of Cubic Equiaxed Morphology and Its Ti Stabilizing in Nb3Sn Superconductors

Effects of Heat Treatments on the Nb<sub>3</sub>Sn Composite Strands

Microstructure Evolution of Nb3sn Superconductors During Diffusion Treatment by Bronze Route

Effect of Cubic Equiaxed Grains and Its Ti-Stabilizing Performance in Nb3sn Strands

Magnetization Study of Iter-Type Internal-Sn Nb3sn Superconducting Wire

Characterization and Analysis of Microstructures of Nb_3Sn Multifilamentary Superconductors during Diffusion Treatment by Bronze Route

Application of Thermal Analysis Technology to Diffusion Heat Treatment Processing of Nb3Sn Multifilamentary Superconductors

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

Effect of heat treatment on the structure and mechanical properties of the semi-finished products from NbTa(Zr,Hf,Y) alloy for the manufacture of Nb3Sn superconductors

[P67] Isothermal Section of the Ti-Nb-Sn Ternary System at 700 °C

Investigation on the Recrystallization and Nb3Sn Microstructure of Nb Alloys with Large Deformation During Heat Treatment

X-Ray Absorption Spectroscopy to Investigate Precipitated Oxides in Nb 3 Sn Wires With an Internal Oxygen Source

X-ray studies: Phase transformations and microstructure changes

Study of Fault Conditions During Heat Treatment of Nb3Sn Strand

Residual Stress in Nb3Sn Superconductor Strand Introduced by Structure and Stoichiometric Distribution after Heat Treatment

Fabrication and Performance of Nb3Sn Superconducting Joints