Abstract:In piezoelectric coupled shells, the distributed actuation force usually consists of four components, including the membrane force and bending moment in the longitudinal direction, and the membrane force and bending moment in the circumferential direction. For commonly used bi-axial piezoelectric materials, such as PZT and PVDF, these four components may have phase difference of pi or -pi. This leads to force cancellation and reduces the overall control effectiveness. Supposing that one piezoelectric actuator is uni-axial, for example only d(31) is not equal to zero, and then this actuator will generate actuation force with the first two components or the latter two, depending on the actuator configuration and the shell geometry/modes. Accordingly the force cancellation can be avoided or minimized. In this research, the Macro-Fiber Composite (MFC) actuators are used as uni-axial actuators. The dynamic equation of a conical shell is firstly given. Then the actuation force is derived based on the converse piezoelectric effect and thin shell assumptions. Three types of the MFC actuators are considered, including MF'C-P1, MFC-P2 and MFC-P3. Case studies are performed to evaluate the distributed actuation forces. Both axial and transverse vibrations of the conical shell are formulated to study the force cancellation of various shell modes, and the payload effects are considered in the analysis. The results show that, by using the MFC actuators, actuation force can be enhanced because force cancellation is avoided. The force enhancement becomes even more significant for membrane dominated modes, such as axial modes of shells with heavy payloads.

Vibration control of a simply supported cylindrical shell using a laminated piezoelectric actuator

Adaptive Vibration Control of A Cylindrical Shell with Laminated Pvdf Actuator

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Microscopic actuation and optimal actuator locations of paraboloidal cylindrical shells

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Active Control of Nonlinear Piezoelectric Circular Shallow Spherical Shells

Active Vibration Control of a Double-curved Shell with a Laminated Polyvinylidene Fluoride Actuator

Control Effectiveness of Segmented Actuators Laminated on Ring-Shells

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Spatially Filtered Vibration Control of Cylindrical Shells

Active Control of the Piezoelastic Laminated Cylindrical Shell'S Vibration under Hydrostatic Pressure

Active control of functionally graded laminated cylindrical shells

Multi-mode Vibration Averagely Control for Cylindrical Shells by Optimally Distributed Piezoelectric Sensors and Actuators

Wireless Active Vibration Control of Thin Cylindrical Shells Laminated with Photostrictive Actuators

Control of Static Shape, Dynamic Oscillation, and Thermally Induced Vibration of Nozzles

Investigation of Actuating Characteristics of Laminated PVDF Actuator Used on Paraboloidal Shells

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

DYNAMICS AND DISTRIBUTED CONTROL OF CONICAL SHELLS LAMINATED WITH FULL AND DIAGONAL ACTUATORS

Experiments on Vibration Control of a Piezoelectric Laminated Paraboloidal Shell

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite