Abstract:An optimization of GDI engine combustion noise was evaluated through experimental and simulation methods. First, finite element model of engine was established; the vibration response and combustion noise caused by combustion incentives were calculated by the direct frequency response method and the acoustic transfer vector method. Above of this, the pure combustion noise attenuation curve was defined. According to the combustion spectrum calculated, the optimized frequency range was determined. Then, combining with the analysis result of the combustion noise attenuation curve, the frequency position of cylinder pressure spectrum to be optimized was obtained. Besides this, the combustion parameters were measured through test and its relationship to cylinder pressure spectrum and engine power performance was studied, the noise-performance map was established. Based on optimized cylinder pressure spectrum and noise-performance map, the optimum values of combustion parameter were marked very quickly. The results show that, when the fuel injection timing optimization value was used, combustion noise was reduced most by 6.4 dB in the range of 0-1000 Hz, while torque reduced only by 3.8 Nm, which achieved the goals of the favoring NVH performance and engine power performance. (C) 2018 Institute of Noise Control Engineering.

Virtual-prototype-based Noise-Reduction Study on Single-Cylinder Diesel Engines

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Application of Virtual Prediction Method to Low-Noise Diesel Engine Design

Vibration and noise reduction for a 490 diesel engine body

Experimental Study on Diesel Engine Noise

Study on the Relationship Between Adjustable Operational Parameters and Noise of Single-Cylinder Diesel Engine

Experimental Validation of Sound Quality Simulation and Optimization of a Four-Cylinder Diesel Engine

Study on Optimization Method of GDI Engine Combustion Noise Based on Noise-Performance Map

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Mechanism and Optimization of Fuel Injection Parameters on Combustion Noise of DI Diesel Engine

A Study on the Numerical Simulation Method for the Acoustic Performance of Exhaust Catalytic Muffler

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

Coupled optimization of internal combustion engine radiated noise and interior noise

Study of NVH performance improvement for a four-cylinder diesel engine body

Structural Performance Analysis and Optimization of Small Diesel Engine Exhaust Muffler

Modeling, attenuation and flow field analysis of diesel engine muffler using fluid structure interaction approach and experimental analysis

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Optimization of Gasoline Engine Intake System Based on 1D, 3D and Coupled Simulations