Abstract:Welded hollow spherical joint is widely used in large-span spatial structures due to its simple structure, clear mechanical behavior and convenient connection. However, a large number of sphere-pipe connection welds at the joints will inevitably produce complex welding residual stress, which will have adverse effects on the stiffness of the joints and the overall safety of the structure. Focusing on the sphere-pipe connection welds on the hollow spherical joints, this paper keeps track of the whole process of sphere-pipe welding, analyzes and summarizes the distribution law and specific distribution mode of welding residual stress on the joints and parametrically analyzes the influence trend of the configuration dimension of joints on the distribution of welding residual stress. Studies have found that the circumferential welding residual tensile stress is mainly concentrated in and near the weld, while the compressive stress is concentrated in the outer area of the weld. The longitudinal residual stress shows the obvious bending features of external compression and internal tension along the wall thickness direction near the weld; The configuration dimension of the hollow spherical joint mainly affects the influence range of welding residual stress, that is, with the change of dimension, the welding heat-affected zone on steel pipes will vary within the area with a distance to the weld 0.6~1.35 times the diameter, and the heat-affected zone on spherical joints will vary within the area with a distance to the weld no more than 0.5 times the diameter. The above-mentioned refined research on the residual stress of the hollow spherical joint can lay a foundation for the accurate evaluation of the stiffness and overall safety of the welded hollow spherical joints.

Simulation and Stress Analysis of X Type Weld Joint Welding Process on Large Sphere Tank

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints with Square Steel Tubes Subjected to Combined Axial Forces and Biaxial Bending Moments

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints Connected with Square Steel Tubes

Welding Numerical Simulation Analysis of AP 1000 Insert Plate and Penetration Sleeves Based on ABAQUS

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Effect of Weld on Axial Buckling of Cylindrical Shells

Welding residual stress analysis of the X80 pipeline: simulation and validation

Finite element synthesized analysis of the forming process of spiral welded pipe

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Numerical simulation and analysis of welding of drive axle housing and axle tube

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation of Tube-Plate Welding Structure with T-Shaped Sections

Stress Analysis of Large Oil Storage Tanks Based on Combined Cylindrical Shell

Microstructure Simulation and Experiment for the Weak Weld Joint of a Domed Storage Tank during an Explosion Based on the Cellular Automaton Method

Finite element simulation of welding process and real-time monitoring assessment

DISTRIBUTION OF RESIDUAL STRESS IN THE SPHERE-PIPE CONNECTION WELDS OF WELDED HOLLOW SPHERICAL JOINTS

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline