Abstract:As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC–MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides , which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.

Optimization of the operating conditions of PAC-MBR for treating micro-polluted water sources

Pesticide Wastewater Treatment by a Membrane Bioreactor

Membrane Fouling Mechanisms and Control in MBR/PAC Process for Treatment of Micro-polluted Source Water

Membrane Bioreactor for Treatment of Micro-polluted River Water

Combined Process of MBR and PAC for Treatment of Tailwater from WWTP

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Study on the Influence Factors of MBR-PAC System

Powdered Activated Carbon-MBR Process for Treatment of Micro-polluted Raw Water

Study on optimization of operational conditions of integrated membrane bioreactor applied to aquaculture wastewater

STUDY OF TREATMENT OF MICRO-POLLUTED RAW WATER BY PAC-MBR PROCESS

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Analysis on technical structure and operating parameters of membrane bioreactor (MBR) in application

Optimization of membrane bioreactors by the addition of powdered activated carbon.

THE STUDY ON OPTIMIZATION OF MICRO AERATION CONDITIONS IN INTEGRATED VERTICAL FLOW CONSTRUCTED WETLAND

Effect of Dosing Powdered Activated Carbon on Operational Performances of MBR

Design and operation of an A/O-MBR process for campus sewage treatment and reclamation

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Feasibility study of powdered activated carbon membrane bioreactor (PAC-MBR) for source-separated urine treatment: A comparison with MBR

Operation character of membrane bioreactor in treating the water of micro-polluted water source

Multi-Objective Optimization Based on Simulation Integrated Pareto Analysis to Achieve Low-Carbon and Economical Operation of a Wastewater Treatment Plant

Operating Conditions Optimization and Characteristics Study of an AnMBR/A/OMBR Process for Coking Wastewater Treatment