Abstract:In microfiltration processes for drinking water treatment, one method of removing trace contaminants is to add powdered activated carbon (PAC). Recently, a version of PAC called superfine PAC (S-PAC) has been under development. S-PAC has a smaller particle size and thus faster adsorption kinetics than conventionally sized PAC. Membrane coating performance of various S-PAC samples was evaluated by measuring adsorption of atrazine, a model micropollutant. S-PACs were created in-house from PACs of three different materials: coal, wood, and coconut shell. Milling time was varied to produce S-PACs pulverized with different amounts of energy. These had different particles sizes, but other properties (e.g. oxygen content), also differed. In pure water the coal based S-PACs showed superior atrazine adsorption; all milled carbons had over 90% removal while the PAC had only 45% removal. With addition of calcium and/or NOM, removal rates decreased, but milled carbons still removed more atrazine than PAC. Oxygen content and specific external surface area (both of which increased with longer milling times) were the most significant predictors of atrazine removal. S-PAC coatings resulted in loss of filtration flux compared to an uncoated membrane and smaller particles caused more flux decline than larger particles; however, the data suggest that NOM fouling is still more of a concern than S-PAC fouling. The addition of calcium improved the flux, especially for the longer-milled carbons. Overall the data show that when milling S-PAC with different levels of energy there is a tradeoff: smaller particles adsorb contaminants better, but cause greater flux decline. Fortunately, an acceptable balance may be possible; for example, in these experiments the coal-based S-PAC after 30 min of milling achieved a fairly high atrazine removal (overall 80%) with a fairly low flux reduction (under 30%) even in the presence of NOM. This suggests that relatively short duration (low energy) milling is viable for creating useful S-PAC materials applied in tandem with microfiltration.

Optimization of membrane bioreactors by the addition of powdered activated carbon.

Mechanisms of Fouling Control in Membrane Bioreactors by the Addition of Powdered Activated Carbon

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

The Performance of Hybrid Anaerobic Membrane Bioreactors (AnMBRs) Added with Powdered Activated Carbon (PAC) Based on Different Sludge Retention Times

The impact of powdered activated carbon types on membrane anti-fouling mechanism in membrane bioreactors

Evaluating the impacts of a high concentration of powdered activated carbon in a ceramic membrane bioreactor: Mixed liquor properties, hydraulic performance and fouling mechanism

Comparing Powdered and Granular Activated Carbon Addition on Membrane Fouling Control Through Evaluating the Impacts on Mixed Liquor and Cake Layer Properties in Anaerobic Membrane Bioreactors

Improving the performance of an aerobic membrane bioreactor (MBR) treating pharmaceutical wastewater with powdered activated carbon (PAC) addition

Revisiting the effects of powdered activated carbon on membrane fouling mitigation in an anaerobic membrane bioreactor by evaluating long-term impacts on the surface layer.

Hybrid powdered activated carbon-activated sludge biofilm formation to mitigate biofouling in dynamic membrane bioreactor for wastewater treatment

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Effect of Dosing Powdered Activated Carbon on Operational Performances of MBR

The effects of powdered activated carbon or ferric chloride on sludge characteristics and microorganisms in a membrane bioreactor

Using adsorbent made from sewage sludge to enhance wastewater treatment and control fouling in a membrane bioreactor

Pre-depositing versus mixing powdered activated carbons for gravity-driven membrane systems during treated domestic wastewater filtration: Permeability stabilization and removal performance

Using Polyaluminum Chloride and Polyacrylamide to Control Membrane Fouling in A Cross-Flow Anaerobic Membrane Bioreactor

Enhanced performance and mechanism of adsorption pretreatment for alleviating membrane fouling in AGMBR: Impact of structural variations in carbon adsorbents

Study on the Influence Factors of MBR-PAC System

Effect of Powdered Activated Carbon (PAC) on MBR Performance and Effluent Trihalomethane Formation: at the Initial Stage of PAC Addition.

Superfine powdered activated carbon (S-PAC) coatings on microfiltration membranes: Effects of milling time on contaminant removal and flux