Abstract:A laboratory membrane bioreactor (MBR) using a submerged polyethylene hollow-fibre membrane module with a pore size of 0.4μm and a total surface area of 0.2m2 was used for treating a raw water supply slightly polluted by domestic sewage. The feeding influent had a total organic carbon (TOC) level of 3–5mg/L and an ammonia nitrogen (NH3-N) concentration of 3–4mg/L. The MBR ran continuously for more than 500 days, with a hydraulic retention time (HRT) as short as 1h or less. Sufficient organic degradation and complete nitrification were achieved in the MBR effluent, which normally had a TOC of less than 2mg/L and a NH3-N of lower than 0.2mg/L. The process was also highly effective for eliminating conventional water impurities, as demonstrated by decreases in turbidity from 4.50±1.11 to 0.08±0.03 NTU, in total coliforms from 105/mL to less than 5/mL and in UV254 absorbance from 0.098±0.019 to 0.036±0.007cm−1. With the MBR treatment, the 3-day trihalomethane formation potential (THMFP) was significantly reduced from 239.5±43.8 to 60.4±23.1μg/L. The initial chlorine demand for disinfection decreased from 22.3±5.1 to 0.5±0.1mg/L. The biostability of the effluent improved considerably as the assimilable organic carbon (AOC) decreased from 134.5±52.7 to 25.3±19.9μg/L. All of these water quality parameters show the superior quality of the MBR-treated water, which was comparable to or even better than the local tap water. Molecular size distribution analysis and the hydrophobic characterisation of the MBR effluent, in comparison to the filtered liquor from the bioreactor, suggest that the MBR had an enhanced filtration mechanism. A sludge layer on the membrane surface could have functioned as an additional barrier to the passage of typical THM precursors, such as large organic molecules and hydrophobic compounds. These results indicate that the MBR with a short HRT could be developed as an effective biological water treatment process to address the urgent need of many developing countries that are plagued by the serious contamination of surface water resources.

Powdered Activated Carbon-MBR Process for Treatment of Micro-polluted Raw Water

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

STUDY OF TREATMENT OF MICRO-POLLUTED RAW WATER BY PAC-MBR PROCESS

Membrane Bioreactor for Treatment of Micro-polluted River Water

Pesticide Wastewater Treatment by a Membrane Bioreactor

Effect of Powdered Activated Carbon (PAC) on MBR Performance and Effluent Trihalomethane Formation: at the Initial Stage of PAC Addition.

Study on Polypropylene Hollow Fiber Based Recirculated Membrane Bioreactor for Treatment of Municipal Wastewater

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Effect of Dosing Powdered Activated Carbon on Operational Performances of MBR

Operation character of membrane bioreactor in treating the water of micro-polluted water source

Membrane Fouling Mechanisms and Control in MBR/PAC Process for Treatment of Micro-polluted Source Water

Feasibility study of powdered activated carbon membrane bioreactor (PAC-MBR) for source-separated urine treatment: A comparison with MBR

Combined Process of MBR and PAC for Treatment of Tailwater from WWTP

Comparing Powdered and Granular Activated Carbon Addition on Membrane Fouling Control Through Evaluating the Impacts on Mixed Liquor and Cake Layer Properties in Anaerobic Membrane Bioreactors

Membrane bioreactor for the drinking water treatment of polluted surface water supplies.

Optimization of membrane bioreactors by the addition of powdered activated carbon.

Study on the Influence Factors of MBR-PAC System

Improving the performance of an aerobic membrane bioreactor (MBR) treating pharmaceutical wastewater with powdered activated carbon (PAC) addition

The effects of powdered activated carbon or ferric chloride on sludge characteristics and microorganisms in a membrane bioreactor

Evaluating the impacts of a high concentration of powdered activated carbon in a ceramic membrane bioreactor: Mixed liquor properties, hydraulic performance and fouling mechanism