Abstract:This work attempts to prepare ethylene-a-olefin copolymer with relatively narrow composition distribution by modification of TiCl4/MgCl2 type supported Ziegler-Natta catalyst. A TiCl4/ID/MgCl2 type catalyst, where ID is a diester, was treated at room temperature with 2,6-'Pr2C6H3-OH at phenol: Ti molar ratio of 1:1 and the modified catalyst was analyzed for contents of titanium and aryloxy group. It was found that about one third of the titanium atoms in the modified catalyst (M-cat) was connected with an aryloxy group, but its Ti content was decreased to 1.44 wt% from 2.36 wt% of the original catalyst (O-cat). Ethylene-1-hexene copolymerization was conducted in n-heptane with M-cat or O-cat as catalyst and triisobutyl aluminium or methylaluminoxane as cocatalyst. The M-cat showed similar activity as the O-cat in catalyzing the copolymerization, but presented a weaker comonomer activation effect than the latter. The 1-hexene content of copolymer synthesized by M-cat was lower than that of the product of O-cat at the same conditions, but had a markedly narrower composition distribution. Each copolymer sample was fractionated into two fractions by extraction with boiling n-heptane, and the soluble part contains much more 1-hexene units than the insoluble part. The ratio of I-hexene content in the soluble fraction to that of the insoluble fraction was higher than 18 in copolymer prepared with O-cat, but this ratio was reduced to 3.7 when M-cat was used as the catalyst. On the other hand, the soluble part of copolymer prepared with M-cat showed a more random sequence distribution than that of the O-cat. The distributions of active centers in both the M-cat and O-cat were studied by deconvolution of the polymer's molecular weight distribution curves with multiple Flory most-probable distribution function. Both catalysts showed a broad molecular weight distribution that can be ascribed to 5 similar to 6 types of active centers, but the introduction of aryloxy group in the catalyst caused marked changes in the active center distribution. Possible mechanism of the catalyst modification was proposed.

Copolymerization of Ethylene and Butylene-1 with Monotitanocene/Methylaluminoxane As the Catalyst

Engineering Ethylene/1-Hexene Copolymers from Ethylene Stock with a Model-Guided Catalyst Feeding Policy

Ethylene polymerization with metallocene/late transition metal combined catalysts

Synthesis and characterization of polybutadiene with monotitanocene/methylaluminoxane catalyst

Ethylene/α‐olefin Copolymerization with Bis(β‐enaminoketonato) Titanium Complexes Activated with Modified Methylaluminoxane

Ethylene/Propylene Copolymerization with Half-Titanocene/Mao Catalyst - Ii. C-13-Nmr Analysis of Ethylene-Propylene Copolymer

Branched Polyethylene Prepared Byin Situ Copolymerization of Ethylene with Monotitanocene and Modified Methylaluminoxane Catalyst

Copolymerization of Ethylene and Cyclopentene with Bis(β‐enaminoketonato) Titanium Complexes

Ethylene–propylene Copolymerization with Bis(β‐enaminoketonato) Titanium Complexes Activated with Modified Methylaluminoxane

Synthesis and Characterization of High Molecular Weight Atactic Polybutene‐1 with a Monotitanocene/methylaluminoxane Catalyst System

Structure and Properties of Ethylene/propylene Copolymers Synthesized with Bis(2,4,7-Trimethylindenyl)zirconium Dichloride Activated by Methyl Aluminoxanes Containing Different Amount of Trimethylaluminum

Ethylene/Styrene Copolymerization in the Presence of Cyclopentadienyltitanium Tribenzyl Oxide and Various Methylaluminoxanes

Ethylene Homopolymerization and Copolymerization with Α-Olefins Catalyzed by Titanium Complexes Bearing [O−NSR] Tridentate Ligands

Synthesis of polybutadiene with titanocene catalyst

Influence of Cocatalyst on High Temperature Polymerization of Propylene Catalyzed by Ziegler-Natta Catalyst

Atactic Polymerization of Propylene Catalyzed by Mono(η5‐cyclopentadienyl)titanium Tribenzyloxide Combined with Methylaluminoxane

Synthesis of Branched Polyethylene by Ethylene Homopolymerization with Novel Mono-titanocene Catalysts

Ethylene/α‐olefin Copolymerization Using Diphenylcyclopentadienyl‐phenoxytitanium Dichloride/al(ibu)3/[ph3c][b(c6f5)4] Catalyst Systems

Ethylene-1-Hexene Copolymerization with A 2,6-Diisopropylphenol Modified Supported Ziegler-Natta Catalyst

ETHYLENE/PROPYLENE COPOLYMERIZATION WITH HALF-TITANOCENE/MAO CATALYST III. CHARACTERIZATION AND STRUCTURE ANALYSIS OF ETHYLENE-PROPYLENE COPOLYMER

Synthesis and Characterization of Branched Polyethylene by Ethylene Homopolymerization with Monotitanocene and Modified Methylaluminoxane Catalysts