Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Study on Interfacial Modification of HDPE/Nano-CaCO_3 Composite

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

Effect of HDPE-g-MAH on Properties of HDPE/Graphite Thermal Conductive Composites

Thermal Degradation and Flammability Properties of HDPE/EVA/C60 Nanocomposites

Effect of different nanofillers incorporation on HDPE/LDPE films nanocomposite

The study on microstructure and mechanical properties of multi-component composite based on HDPE

Exploring the Effects of Nano-CaCO3 on the Core–Shell Structure and Properties of HDPE/POE/Nano-CaCO3 Ternary Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Study on Modification of Recycled HDPE/Wood Powder Composite

STUDY ON PROPERTIES OF HIGH DENSITY POLYETHYLENE/WOOD FLOUR COMPOSITES

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

Mechanical, thermal, and dynamic compression of high-density polyethylene nanocomposites with graphene, montmorillonite, and calcium carbonate

Study on LLDPE Modified with Halloysite Nano-meter Tube

High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay

Co-composite Effects of Inorganic Particles on HDPE Resin

Evaluation of mechanical and thermal properties and creep behavior of micro- and nano-CaCO3 particle-filled HDPE nano- and microcomposites produced in large scale

Study on the Properties and Structure of Polypropylene Modified with Nano-Sized CaCO_3

Interfacial and mechanical performance of chemically modified high content MWCNT/PEEK thermoplastic composites

INFLUENCE OF SURFACE MODIFIER AND SILICONE OIL ON THE MECHANICAL PROPERTIES OF HDPE/Al(OH)3 COMPOSITE

Study on fluidity and mechanics performance of UHMWPE/HDPE composite material

Study on the Structure and Performance of Carbon Nanotube/High-Density Polyethylene Composite Film