Abstract:The influence of glycine, as a chelating agent, and triblock copolymer mixture of PPG-PEG-PPG and PEG1000, as a suppressor agent, on the deposition mechanisms of zinc and zinc-nickel alloys were studied by cyclic voltammetry (CV) and potentiometric electrochemical impedance spectroscopy (PEIS), using electrolyte solutions of chlorinated acid. Cyclic voltammetry measurements show that the composition of the electrolytic solution affects the voltammogram profiles. Complementary PEIS investigations allowed the electrodeposition mechanisms to be highlighted depending on the composition of the electrolytic solution. The electrodeposition of zinc, in the absence of additives, occurs in a single cathodic wave from the ZnCl 3 − species, whereas in the presence of glycine, a second more cathodic reduction wave is relative to the Zn(Gly) 2 2+ species. The presence of the PPG-PEG-PPG and PEG1000 triblock copolymer induces a clear inhibition of the zinc reduction. Nevertheless, the zinc electrodeposition follows a three-dimensional instantaneous nucleation. The zinc electroplating mechanism involves a capacitive semi-circle at high frequency and two inductive loops at medium and low frequencies assigned to two adsorbed intermediates onto the substrate whatever the electrolyte composition. The presence of the polymer mixture affects the zinc reduction by increasing the charge-transfer resistance and the adsorption phenomena on the substrate. The electrodeposition of zinc-nickel alloys reveals a single reduction wave, from ZnCl 3 − and Ni(Gly) 2+ species, and multiple anodic signals depending on the electrolytic composition, according to the presence of glycine to chelate the nickel species. The zinc-nickel electroplating was evidenced to be a multiple-step process with a three-dimensional instantaneous nucleation, including intermediate species adsorbed onto the substrate. The equivalent circuit proposed consists of two capacitive half-circles separated by an inductive loop for any electrolytic solution. However, the impedance spectra were affected by the presence of glycine by modifying the inductive loop reflecting the first adsorbed intermediate (Ni(I) ads ). The morphology of zinc and zinc-nickel, with a nickel content between 14 and 19 wt.%, is affected by the electrolyte composition, however with the same crystal lattice. The preferential orientation of the lattice was shown to depend on the additives present in the solution.

The effect of chelating agents on the cathodic polarization and the electrodeposition of iron powders

The Effect of Suspended Particles on the Corrosion Resistance of Electrodeposited Zinc Powders

Effect of citric acid as a chelating agent on anodic behavior of pure iron with potentiostatic polarization and cyclic voltammetry methods

Comparative Experiment on Influence of Ferrum and Cuprum Electrodes on Electroosmotic Effects

Effects of Fe(III) and Cu(I) on Electrodeposition and Microstructure Characterization for Acid Plating Bath

The Effects of Fe@C Nanoparticles on the Lithium Storage Performance of VS4 Anode

Electrochemical Study of the Additive-Effect on Sn Electrodeposition in a Methansulfonate Acid Electrolyte

Enhanced removal of heavy metals from electroplating wastewater through electrocoagulation using carboxymethyl chitosan as corrosion inhibitor for steel anode

Synergistic promotion of ascorbic acid and sodium citrate to the stability of electrolyte for electrolytic iron production

Effect of EDTA and NH 4 Cl additives on electrodeposition of Zn–Ni films from choline chloride-based ionic liquid

The effects of additive agents on zinc and zinc-nickel alloys electrodeposited on steel substrates in acidic electrolytes

Effect of Process Parameters on Electrodeposition Process of Co-Mo Alloy Coatings

Preparation of Iron Oxide Adsorbent Modified by Chitosan Biomaterials and Its Adoption in the Adsorption of Heavy Metals

Elucidating the Influence of Electrolyte Additives on Iron Electroplating Performance

The Research of the Effect of Chloride Ion on the Mechanism of the Corrosion of Iron in Dilute Acidic Solutions

Effect of synthesis pH and EDTA on iron hexacyanoferrate for sodium-ion batteries

Influence of Fe Ions on Anode Performance and the Mechanism of Action during Copper Electrowinning Process

Synergistic Effect of Ethylene Thiourea and Bis-(3-sulfopropyl)-disulfide on Acid Cu Electrodeposition

A Mini-Review on the Use of Chelating or Reducing Agents to Improve Fe(II)-Fe(III) Cycles in Persulfate/Fe(II) Systems

Effect of Electroplating Bath Composition on Corrosion Resistance of Deposited Cobalt Films