Abstract:Structural damage in turbomachinery is a primary origin of aeronautic accidents, which is receiving increased attention. This study is thus focused on the aeroelastic analysis of damaged blades, including the onset of flutter and underlying mechanisms. First, a high-fidelity fluid–solid coupling system is established with computational fluid dynamics (CFD) and computational structural dynamics (CSD) technologies, via which the dynamic aeroelastic analysis is conducted based on static aeroelastic deformation. Second, a damaged rotor blade is parametrically modelled with variable damage levels, extents, and positions. Finally, the modal identification method of spectral proper orthogonal decomposition (SPOD) is applied to observe flow details and provide physical insight into the flutter mechanism for damaged blades. Numerical analysis finds that there is a critical damage level below which the aeroelastic stability is positively improved with increasing damage level; otherwise, a significant loss of stability is induced. The damage location and extent further affect this critical damage level and the change rate crossing the threshold. The simulation with CFD/CSD finds that the high pressure near the trailing edge induced from boundary layer separation suppresses vibrations in stable conditions, but motivates vibrations during flutter, which is because of the high-pressure spread to nearing blades. SPOD modes reveal that high-frequency disturbances with large scale are primary factors inducing flutter, which is further stimulated by the high-order disturbances with small scale. This study provides a crucial foundation for the fatigue prediction for rotor blades in service and the optimisation design for high-performance turbomachinery in the near future.

A NEW TYPE OF CAVITATION DAMAGE TRIGGERED BY BOUNDARY-LAYER TURBULENT PRODUCTION

Challenges to turbine development

Effect of Cavitation Evolution on Power Characteristics of Tidal Current Turbine

Analysis of the Bucket Surface Cavitation Characteristics of a Model Pelton Turbine

Study On Vortex Generators For Control Of Attached Cavitation

Cavitation pressure fluctuation characteristics of a prototype pump-turbine analysed by using CFD

Study on Vibration and Failure of Transverse Flow Turbine Based on Fluid–Structure Interaction

Damages on Steel Surface at the Incubation Stage of the Vibration Cavitation Erosion in Water

Experimental on spatial-temporal evolution characteristics of the blade tip cavitation in a mixed flow waterjet pump

Evolution mechanism of water column separation in pump turbine: Model experiment and occurrence criterion

A Review on Fatigue Damage Mechanism in Hydro Turbines

Effects of Head and Discharge on Internal Flow Characteristics of a High-Quality Installed 1 GW Francis Turbine

Effect of multiple factors on sediment erosion characteristics of hydro turbine materials

Experimental Francis Turbine Cavitation Performances of a Hydro-Energy Plant

Study on Internal Flow Characteristics and Abrasive Wear of Pelton Turbine in Sand Laden Water

Study on cavitation near band area in Francis runner

Influence of cavitation on vortical structures and energy loss in a waterjet pump

Analytical Model of Unsteady Internal Water Pressure Propagation along Cracks in Hydropower Tunnel Walls

Water column separation in pump-turbine after load rejection: 1D-3D coupled simulation of a model pumped-storage system

Research on Incipient and Critical Cavitation of a Francis Turbine

Exploration on flutter mechanism of a damaged transonic rotor blade using high-fidelity fluid–solid coupling method