Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

Analysis of the Bucket Surface Cavitation Characteristics of a Model Pelton Turbine

Numerical Analysis of Cavitation Characteristics on Front Surfaces of Different Pelton Turbine Buckets

Numerical Simulation of Cavitation Flow Characteristic on Pelton Turbine Bucket Surface

Numerical Analysis of the Bucket Surface Roughness Effects in Pelton Turbine

Investigation on sediment erosion in bucket region of Pelton turbine considering cavitation

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Numerical Analysis of A Pelton Bucket Free Surface Sheet Flow and Dynamic Performance Affected by Operating Head

Analyses of the spatial and temporal features of the blade pressure‐side cavitation in a pump‐turbine runner in the pump mode

Numerical Analysis of a Pelton Runner Water Sheet Flow under Super-High Head

Mechanism of Unsteady Free Water Sheet Flow on Bucket Surface

Study on Internal Flow Characteristics and Abrasive Wear of Pelton Turbine in Sand Laden Water

Analysis of hydro-abrasive erosion in Pelton buckets using a Eulerian-Lagrangian approach

Effects of sediment characteristics on the erosion of Pelton turbine

Experimental and Numerical studies on Opening and Velocity Influence on Sediment Erosion of Pelton Turbine Buckets

Numerical Assessment of the Hydrodynamic Excitation Characteristics of a Pelton Turbine

Effect of the Operating Head for Hydraulic Performance and Flow of a Pelton Turbine

Experimental Study of Sediment Erosion in Pelton Turbine Bucket

Investigation on unstable flow characteristics and energy dissipation in Pelton turbine

Numerical Simulation of Unsteady Free Surface Flow and Dynamic Performance for a Pelton Turbine

Numerical and Experimental Analysis of the Hydraulic Performance of a Prototype Pelton Turbine

Analysis of the Air-Water-sediment Flow Behavior in Pelton Buckets Using a Eulerian-Lagrangian Approach