Abstract:Horizontal axis double-runner Francis turbines have great advantages in the development of small hydropower plants, but the arrangement of double runners aggravates the complexity of the water flow between runners, and the mutual influence of the two runners cannot be ignored. In order to explore the relationship between the performance and the internal flow field and investigate the pressure pulsation characteristics of the double-runner Francis turbine, the steady and unsteady numerical analysis of the full flow channel of a prototype turbine was carried out based on the Realizable k-epsilon model and the polyhedral mesh method. The results show that the relationship between the average efficiency of the two runners and the flow difference between the runners is negatively correlated. As the flow rate difference between the runners on both sides increases, the average efficiency of the runners decreases. The draft tube flow of a horizontal-axis turbine has a profound effect on the flow field characteristics in the runner. When the working conditions change, the turning and converging timing of the mainstream at the outlet of the two runners will change. The movement of the mainstream promotes the change in location of the dead water zone. The existence of the vortex zone makes the pressure distribution at the outlet of the runner uneven, which is an important reason for the asymmetry of the flow in the runner. The analysis of pressure pulsation and its frequency spectrum shows that when the working conditions change, the low-frequency, strong pressure pulsation area on the surface of the guide vane will regularly migrate between the two runners, while the high-frequency pressure pulsation that occurs in the bladeless zone will dissipate in the runner. The doubling of the blade frequency on the pressure surface and back surface of the blades gradually attenuates with the increase of frequency. The pressure pulsation attenuation on the surface of the high-position blade conforms to the linear law, and the attenuation of the pressure pulsation on the surface of the low-position blade conforms to the exponential law. The research in this paper provides a certain reference value for revealing the flow field mechanism and pressure pulsation characteristics of the double-runner Francis turbine.

Effects of Head and Discharge on Internal Flow Characteristics of a High-Quality Installed 1 GW Francis Turbine

Flow Characteristics Analysis of a 1 GW Hydraulic Turbine at Rated Condition and Overload Operation Condition

Investigating the Performance of a Super High-head Francis Turbine under Variable Discharge Conditions Using Numerical and Experimental Approach

Internal flow characteristics in the draft tube of a Francis turbine under different working conditions

Transient Flow Dynamics Analysis of a Large Prototype Francis Turbine at Different Loads

Experimental and Numerical Simulation Study on the Flow Characteristics of the Draft Tube in Francis Turbine

Numerical Analysis of Unsteady Flow under High‐head Operating Conditions in Francis Turbine

Study on the Internal Flow Characteristics of Long and Short Blade Runners of a 1000 MW Francis Turbine under Different Opening Conditions

Investigation of the Internal Flow in a Francis Turbine for Comparing the Flow Noise of Different Operation Conditions

Testing and Numerical Analysis of Abnormal Pressure Pulsations in Francis Turbines

Analysis of Flow Field Characteristics and Pressure Pulsation in Horizontal Axis Double-Runner Francis Turbine

Internal Flow Characteristics of a Francis Hydro Turbine Model by Internal Flow Passage Shapes

Research on the Hydraulic Characteristics of 1000 MW Francis Runner: Influence of Radial Installation Deviations

Influence of 3D Guide Vanes on the Channel Vortices in the Runner of a Francis Turbine

Numerical Simulation Of 3d Cavitating Turbulent Flow In Francis Turbine

Study on influence of the construction change of the spiral casing and draft tube on the flow loss in low head Francis turbine

Numerical Simulation of Complex Turbulence in an Across Scale Flowing Passage of Francis Turbine

Analysis of the Internal Flow Behavior on S-shaped Region of a Francis Pump Turbine on Turbine Mode

Comparisons of Vortical Flow and Cavitation Inside a Francis Turbine with Different Draft Tubes

Flow in a Francis Turbine with a Three Dimensional Gate Vane

Experimental Francis Turbine Cavitation Performances of a Hydro-Energy Plant