Abstract:The electrochemical biosensor with a well-aligned nanotube array structure has been developed for amperometric detection and quantitative determination on the basis of bioelectrocatalysis mechanism. The independent and free-standing titania nanotube array has been successfully fabricated through an electrochemical anodization process of titanium sheet precursor in a fluoride-containing electrolyte, which can act well as a suitable electrode material for the biosensor application due to its high surface area and superior biocompatibility. In view of a more feasible loading of enyzme probes in accessible tubular channels, nanotube morphologies have been promoted by expanding tube diameter from 60 to 110 nm and increasing tube length from 520 nm to above 920 rim when anodization process at voltage of 20 V in acidic aqueous electrolyte has been adjusted into that at 60 V in neutral ethylene glycol/glycerol electrolyte. The functionalization modification of the titania nanotube array has been sequentially achieved by filling highly-bioactive glucose oxidases into as-formed nanotubes and then electropolymerizing pyrrole monomer into conductive polypyrrole for an interfacial immobilization of these bioactive enzymes. Morphology & microstructure characterization, electrochemical properties and bioelectrocatalytic reactivities of composite electrodes have been fully investigated. Electrochemical impedance spectroscopy has been employed to investigate the electrical conductivity and capacitance analysis. The direct amperometric detection of hydrogen peroxide through a direct electro-reduction reaction can be well fulfilled on bare titania nanotube array with a detection limit up to 2.0x10(-4) mM for ordinary nanotubes and 2.2x10(-4) mM for long nanotubes. A nano-array biosensor based oil the glucose oxidase-titania/titanium composite electrodes have been assembled in a conventional three-electrode system for amperometric detection and quantitative determination of glucose concentration in a pH 6.8 phosphate buffer solution at a potentiostatic condition of -0.4 V vs. the saturated calomel electrode. The glucose oxidase biosensor with a well-constructed nanotube array structure show an excellent performance with a high detection sensitivity of 45.5 mu A mM(-1) cm(-2), a fast responding time of 5.6 s and a very low detection limit of 2.0x10(-3) mM. A good operational reliability has also been achieved with a relative standard deviation below 3.0%. Such a well-designed biosensor with a desired nanotube array structure can consequentially contribute to the potential application of molecule detection and quantitative determination.

Covalently Immobilized Biosensor Based on Gold Nanoparticles Modified TiO2 Nanotube Arrays

Glucose Biosensor Based on Glucose Oxidase Immobilized on Unhybridized Titanium Dioxide Nanotube Arrays

Nickel/Copper Nanoparticles Modified TiO2 Nanotubes for Non-Enzymatic Glucose Biosensors

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

An Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the ZnO Nanotubes

Development of Amperometric Glucose Biosensor Based on Prussian Blue Functionlized TiO2 Nanotube Arrays

Highly stable and sensitive glucose biosensor based on covalently assembled high density Au nanostructures.

Construction Of Nano-Array Electrode Material For Amperometric Detection Application

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

Ni nanoparticles decorated titania nanotube arrays as efficient nonenzymatic glucose sensor

A Novel Glucose Biosensor Based on Direct Electrochemistry of Glucose Oxidase Incorporated in Biomediated Gold Nanoparticles–carbon Nanotubes Composite Film

Amperometric Detection of Glucose with Glucose Oxidase Absorbed on Porous Nanocrystalline TiO2 Film

3D Hydrogen Titanate Nanotubes on Ti Foil: A Carrier for Enzymatic Glucose Biosensor

Gold and Platinum Nanoparticle-Functionalized TiO2 Nanotubes for Photoelectrochemical Glucose Sensing

Ti/TiO2Nanotube Array/Ni Composite Electrodes for Nonenzymatic Amperometric Glucose Sensing

An Amperometric Glucose Biosensor Fabricated with Pt Nanoparticle-Decorated Carbon Nanotubes/tio2 Nanotube Arrays Composite

Glucose Biosensor Based on Glucose Oxidase Immobilized on Multi-Vacancy TiO2 Nanotube Arrays

Immobilization of Glucose Oxidase into a Nanoporous TiO2 Film Layered on Metallophthalocyanine Modified Vertically-Aligned Carbon Nanotubes for Efficient Direct Electron Transfer

Nonenzymatic Glucose Biosensors Based on Silver Nanoparticles Deposited on TiO2 Nanotubes

Immobilization of glucose oxidase on gold nanoparticles modified Au electrode for the construction of biosensor