Abstract:The forming quality of profiled ring rolling not only encompasses macroscopic accuracy but also emphasizes the microstructure. Due to the multiple process parameters and complex metal flow during profiled ring rolling, the various forming defects are difficult to control and difficult to study theoretically. The objective of this study is to establish a comprehensive method for evaluating the forming quality of profiled rings, which considers both the macroscopic forming accuracy and the microstructure. Firstly, the synthetic size factor was defined, and the evolutionary relation between the section forming rate and the diameter growth rate of E-section ring rolling was analyzed in detail. The synthetic size factor can be used to describe the dimensional evolution and evaluate the forming accuracy of the profiled ring rolling process. Taking into full consideration the features of intermittent deformation in local areas, a microstructure evolution model of the Inconel718 alloy during E-section ring rolling, which can accurately predict the recrystallization volume fraction and average grain size of the final ring, was established. Then, combined with finite element simulation, the influence of the rotation speed of the driving roll on the macro-size evolution and microstructure was systematically analyzed. The results indicate that there is often a discrepancy between dimensional accuracy and microstructure uniformity in the optimization trend. For instance, the higher the rotation speed of the driving roll is, the more uniform the microstructure is, but the more difficult it is for the section profile to form. Finally, combined with response surface methodology (RSM), multi-parameter optimization was carried out with section forming accuracy and grain uniformity as the optimization objectives. By using the optimal parameters, an E-section ring with a complete profile and a uniform microstructure was obtained, with a maximum prediction error of the recrystallization volume fraction lower than 5%. The results show that the macroscopic and microscopic quality evaluation methods proposed in this study, as well as the optimization method combining RSM, can be effectively applied to the process optimization of profiled ring rolling.

Effects of rotational speed of driving roll on microstructure evolution during hot ring rolling of as-cast 42CrMo steel

Microstructure Evolution of Inconel 718 Alloy During Ring Rolling Process

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Evolution rules of microstructure of as-cast 42CrMo steel blank under different sizes during radial-axial ring rolling process

Effects of Process Parameters on Microstructural Evolution During Hot Ring Rolling of AISI 5140 Steel

Effect of Drive Roll Rotation Speed on Ring Rolling Process

Microstructure Evolution Modeling of Titanium Alloy Large Ring in Hot Ring Rolling

Numerical Simulation of Microstructure Evolution of Large GCr15 Bar During Multi-Pass Rough Rolling

Multi-scale Simulation of Flow Behavior and Microstructure Evolution for AA2219 Alloy During Multi-Pass Ring Rolling Process

Macrostructure, microstructure and mechanical properties evolution during 8Cr4Mo4V steel roller bearing inner ring forging process

Influence of Different Roll Casting Process Parameters on Casting Microstructure

Effect of Fibrous Macrostructure on Mechanical Properties, Anisotropy and Fracture Mechanism of Roller Bearing Ring

Influence of Rolling Speed on Temperature Field and Microstructure in Continuous Cast-rolling for Lead Strip

Microstructure and Mechanical Properties of As-cast 42CrMo Ring Blank During Hot Rolling and Subsequent Quenching and Tempering

Effects and Optimization of Roll Sizes in Hot Rolling of Large Rings of Titanium Alloy

Numerical Study on Motions of Rolls in Hot Rolling of Titanium Alloy Large Rings

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders

Establishment of Thermal Ductile Fracture Criterion for As-Cast 42CrMo Steel and Its Application in Hot Ring Rolling Process

Rheological Behavior and Microstructure Evolution of Continuous Roll-Casting Process

Multi-scale Simulation of Recrystallization during Rolling of Large 2219 Aluminum Alloy Rings

Evaluation Methods and Coupled Optimization at Macro- and Micro-Scales for Profiled Ring Rolling of Inconel718 Alloy