Abstract:This paper presents the numerical investigation for a shell-and-tube latent heat thermal energy storage system (LHTES) employing numerical modeling and simulation with the FLUENT software. The LHTES consist of coilers where the heat transfer fluid (HTF) flows and a cuboids shell filled with phase change material. The unsteady N-S equation and energy equation using enthalpy measurement to deal with the latent heat of melting/solidification are solved. The effect of the tube diameter on the heat charging performance is examined, and the result shows that the functional relationship between the diameter of the tube and phase-change-rate is not monotonic. The optimal diameter of the tube at 20mm is used in all the subsequent computations. The influence of natural convection on charging and discharging processes is analyzed with positive tube pitch, and the result shows that natural convection plays a crucial role in the charging process and significantly accelerates the melting process; thermal conduction is dominant in the discharging process during the phase change stage which makes the discharging process much slower than the charging. The effects of the initial inlet temperature and velocity of HTF on the charging and discharging processes are studied in the case while PCM has a specific initial temperature. The result indicates that the inlet HTF velocity does not show a significant effect on the charging and discharging processes; the inlet HTF temperature shows a substantial effect on both processes. The temperature changing processes with time at different locations are also analyzed to dig more profound characteristics of the phase change process.

Analysis of dual-phase-lag heat conduction in cylindrical system with a hybrid method

Numerical Analysis of Dual-Phase-lag Heat Transfer in a Layered Cylinder with Nonlinear Interface Boundary Conditions

Numerical Analysis for Dual-Phase-Lag Heat Conduction in Layered Films

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Analytical Solution of Heat Conduction for Hollow Cylinders with Time-Dependent Boundary Condition and Time-Dependent Heat Transfer Coefficient

A semi-analytical method of three-dimensional dual-phase-lagging heat conduction model

Analysis of the bioheat transfer problem with pulse boundary heat flux using a generalized dual-phase-lag model

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Thermal analysis of dual-phase-lag model in a two-dimensional plate subjected to a heat source moving along elliptical trajectories

Numerical solutions for the hyperbolic heat conduction problems in a layered solid cylinder with radiation surface

Heat transfer analysis for tissue with surface heat flux based on the non-linearized form of the three-phase-lag model

Dual-phase-lag heat conduction analysis of a three-dimensional finite medium heated by a moving laser beam with circular or annular cross-section

Investigation for the Dual Phase Lag Behavior of Bio-Heat Transfer

Solution of an Inverse Heat Conduction Problem in a Bi-Layered Spherical Tissue

Analysis of heat conduction problem involving heat source using Lagrangian equation

Analysis of Dual-Phase-lag Thermal Behaviour in Layered Films with Temperature-Dependent Interface Thermal Resistance

Investigation on the Bio-Heat Transfer with the Dual-Phase-Lag Effect

Analysis for Microscopic Hyperbolic Two-Step Heat Transfer Problems

Numerical simulation for non-linear thermal wave

Investigation of the non-Fourier Effect in Bio-heat Transfer

APPLICATION OF HYBRID LAPLACE TRANSFORM/ FINITE-DIFFERENCE METHOD TO TRANSIENT HEAT CONDUCTION PROBLEMS