Abstract:Superhydrophobic conductive nanocomposite coatings are prepared for the first time from the simple mixture of a commercial aqueous silica sol and functionalized multiwalled carbon nanotubes (MWNTs) by air-spraying at ambient conditions followed by fluorosilane treatment. The relationship between MWNT content and the structure and properties of the nanocomposite coatings is investigated systematically. An ultra-low threshold (<5vol.%) for superhydrophobicity is observed, which suggests that MWNTs are superior to any other spherical fillers for the construction of superhydrophobic nanocomposite coatings. When the content of nanotubes is below the threshold, the surface roughness mainly caused by the silica nanoparticles is not enough for creating superhydrophobic surfaces. Only above the threshold, the multiscale hierarchical structure is enough for both high water contact angles (>165°) and extremely low sliding angles (<2°). The conductivity is also percolation dominated, while the threshold for conductivity is much higher than that for superhydrophobicity, which can be ascribed to the encapsulated structure and the agglomeration of nanotubes in the composite coatings during air-spraying. Moreover, the aqueous silica sols hold merits of great film-forming capability at relatively low calcination temperatures, and being free of organic solvents.

Super-Hydrophobicity of Large-Area Honeycomb-Like Aligned Carbon Nanotubes

Formation of AlOOH and Silica Composite Hierarchical Nanostructures Thin Film by Sol–gel Dip-Coating for Superhydrophobic Surface with High Adhesion Force

Super-Hydrophobicity Of Post-Like Aligned Carbon Nanotube Films

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Porous Aligned Carbon Nanotube Films for Ultrahydrophobic Surfaces

Fabrication of superhydrophobic surfaces with non-aligned alkyl-modified multi-wall carbon nanotubes

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Combined Micro-/Nanoscale Surface Roughness for Enhanced Hydrophobic Stability in Carbon Nanotube Arrays

Superhydrophobic Carbon Nanotube Forests

Control over the Wettability of an Aligned Carbon Nanotube Film

Stable Superhydrophobic Surface of Hierarchical Carbon Nanotubes on Si Micropillar Arrays

Exploiting the Hierarchical Morphology of Single-Walled and Multi-Walled Carbon Nanotube Films for Highly Hydrophobic Coatings

A Double-Layered Carbon Nanotube Array with Super-Hydrophobicity

Chemically Robust Carbon Nanotube – PTFE Superhydrophobic Thin Films with Enhanced Ability of Wear Resistance

Mussel-Inspired Modification of Honeycomb Structured Films for Superhydrophobic Surfaces with Tunable Water Adhesion

Strong and Super-Hydrophobic Hybrid Carbon Nanotube Films with Superior Loading Capacity

Construction of a novel vector expressing Survivin-shRNA and fusion suicide gene yCDglyTK and its application in inhibiting proliferation and migration of colon cancer cells

Superhydrophobic Aligned Polystyrene Nanotube Films with High Adhesive Force

Preparation and Characterization of Large-Area Superhydrophobic Nanostructured Carbon Films