Abstract:The reaction between the hydroxyl groups on the surface of acid-treated multi-walled carbon nanotubes (MWNT) and 2-bromo-2-methylpropanoyl bromide generates ATRP initiator sites on the MWNT, and then fluorinated acrylates were polymerized from MWNT via a "graft-from" method. Fourier transform infrared spectrometry (FT-IR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) results indicate that the polymer was covalently attached or grafted to the Surface of MWNT. Using MWNT coated with low surface energy polymer as the filler particles, a solution-casting method was employed to prepare MWNT/polyurethane composite films. The surface of composite films was exposed to tetrahydrofuran (THF) as the etchant to obtain the rough surface with microstructures. Static contact angle tests showed the hydrophobic properties of films were enhanced by adding the MWNT, and the contact angle was increased with the content of MWNT. The MWNT grafted with fluorinated polymers showed better hydrophobic performance than the pristine MWNT at the same content, and the film hydrophobicity was greatly improved after etching by solvent. Scanning electron microscopy (SEM) was used to study the microstructures of surfaces of composite films before and after etching. Effect of MWNT on the hydrophobic properties of the composite film surfaces was in-depth studied. Our experiments demonstrated that the hydrophobic properties of MWNT surfaces could be tuned via functionalization using different surface energy materials and the fabrication of polyurethane composite films with hydrophobic surfaces could be successfully achieved.

Porous Aligned Carbon Nanotube Films for Ultrahydrophobic Surfaces

Super-Hydrophobicity Of Post-Like Aligned Carbon Nanotube Films

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Fabrication of superhydrophobic surfaces with non-aligned alkyl-modified multi-wall carbon nanotubes

Chemically Robust Carbon Nanotube – PTFE Superhydrophobic Thin Films with Enhanced Ability of Wear Resistance

Superhydrophobic Carbon Nanotube Forests

Fluorinated Multi-Walled Carbon Nanotubes and Fabrication of Polyurethane Composite Films with Hydrophobic Surface

Super-Hydrophobic Surface of Aligned Polyacrylonitrile Nanofibers

Facile Fabrication Of Robust Superhydrophobic Multilayered Film Based On Bioinspired Poly(Dopamine)-Modified Carbon Nanotubes

Exploiting the Hierarchical Morphology of Single-Walled and Multi-Walled Carbon Nanotube Films for Highly Hydrophobic Coatings

Superhydrophobic Aligned Polystyrene Nanotube Films with High Adhesive Force

Preparation and Fluid Drag Reduction Properties of Superhydrophobic Paper-Based Films Comprising Carbon Nanotubes and Fluoropolymers

Preparation and Characterization of Large-Area Superhydrophobic Nanostructured Carbon Films

Combined Micro-/Nanoscale Surface Roughness for Enhanced Hydrophobic Stability in Carbon Nanotube Arrays

Control over the Wettability of an Aligned Carbon Nanotube Film

Nanostructured and oriented metal-organic framework films enabling extreme surface wetting properties

Tailoring the wettability of nanocrystalline TiO 2 films

Long-Term And Thermally Stable Superhydrophobic Surfaces Of Carbon Nanofibers